OBiBT

<< < (2/2)

Usetheforceobiwan:
If anyone comes across this thread in the future, the following combo does NOT work:  Obi202 + powered USB hub + Obiline + (2x) ObiBt + ObiWifi.  It's too much stuff connected via USB and if you try to have a call going through Obiline  while another call is happening through ObiBT at the same time, everything blows up.  In fact, it blows up to the point where rebooting doesn't correct it and you physically have to pull the power and then re-power. 

It's presumptuous to assume all this stuff would work at the same time so I'm not upset with Obihai. 

skipro-tahoe:
gigcass,
 How do I set up the trunk line to use only the cell [OBiBT] for outgoing calls. What is the designation for OBiBT?
Is Trunkline list - OBiBT only?
Digitmap?

Can I use a Gateway instead?

If I add secondary SPs, will I be notified is some manner when the primary SP fails and the secondary SP is being used?

How do I set the trunk group as the primary outgoing service?

Navigation

[0] Message Index

[*] Previous page