Simpler configuration using VG1 for Circlenet
giqcass:
Callcentric registers. I don't think the Voice Gateway cares about that.
ProfTech:
Hello Shale,
I found your post about Voice Gateways and have a question I thought maybe you could answer. When I use a Gateway in the "normal" way with FlowRoute, my user id is shown on the other persons caller ID as my caller ID. That is, when user id and password are specified on the AuthUserID and AuthPassword lines. I know I read somewhere that others have seen this phenomenon but can't find it now. CWU sets the CID in their portal so it works fine with them but FlowRoute doesn't have any way to set it. I tried specifying the user id and password using the ui=option in the access number field but when I did, it corrupted the out dialed number. Instead of dialing 12172234567@blah it dialed 1217223@blah which of course fails. I thought maybe if I put the uid / & password there it would let me put my actual CID number in the other field, but never got to the point of testing that. Any ideas?
*edited* i got it to out dial by dropping the op= part but it ignores the CID I put in the AuthUserID field and FlowRoute still shows my User ID. :(
vtsnaab:
A query for Gigcass, please:
Quote from: giqcass on May 06, 2014, 03:01:37 pm
My current config working. My Sp4 is a Callcentric account with no special settings. Please note I did not use "login username" for my auth user ID on the Voice Gateway. I used Circlenet Account number. Perhaps that will help.
Phone Port 1
DigitMap
([1-9]x?*(Mpli)|[1-9]S9|[1-9][0-9]S9|911|**0|***|#|##|**70(Mli)|**8(Mbt)|**81(Mbt)|**82(Mbt2)|**1(Msp1)|**2(Msp2)|**3(Msp3)|**4(Msp4)|**7(Mvg7)|**00(Mvg8)|**9(Mpp)|(Mpli))
OutboundCallRoute
{([1-9]x?*(Mpli)):pp},{(<##:>):li},{(<#:>):ph2},{(<**70:>(Mli)):li},{(<**82:>(Mbt2)):bt2},{(<**81:>(Mbt)):bt},{(<**8:>(Mbt)):bt},{**0:aa},{***:aa2},{(<**1:>(Msp1)):sp1},{(<**2:>(Msp2)):sp2},{(<**3:>(Msp3)):sp3},{(<**4:>(Msp4)):sp4},{(<**9:>(Mpp)):pp},{(Mpli):pli},{(<**00:>(Mvg8)):vg8},{(<**7:>(Mvg7)):vg7}
Voice Gateway7
Enable X
Name circlenet.us
AccessNumber SP4(outbound.circlenet.us)
DigitMap (xx.)
AuthUserID Circlenet Account number
AuthPassword Password
an outbound call for me using the gateway looked like this in call history.
To SP4(14198675309@outbound.circlenet.e)
I will soon need to add CircleNet to my Obi110 and currently the only portions in use are SP1 & 2.
With the model of Obi that I have, I do not recall ever seeing something called 'phone port 1' or the like.
Would you please help those of us with the lesser models to know what will work in adding CircleNet as a VG ??
I have never used a VG in any manner and feel quite lost in looking at the info you've posted for the higher model Obi box.
Thanks !!
giqcass:
Quote from: vtsnaab on May 16, 2014, 01:26:43 pm
I will soon need to add CircleNet to my Obi110 and currently the only portions in use are SP1 & 2.
With the model of Obi that I have, I do not recall ever seeing something called 'phone port 1' or the like.
Would you please help those of us with the lesser models to know what will work in adding CircleNet as a VG ??
I have never used a VG in any manner and feel quite lost in looking at the info you've posted for the higher model Obi box.
Thanks !!
On you device I believe it should be
Physical Interfaces >>> Phone Port
Your DigitMap and OutboundCallRoute will be much less complex then the version in the 202. I think we can use **3 on the Obi100 series since you don't have a service provider 3.
In the OutboundCallRoute you will add this to the end
,{(<**3:>(Mvg1)):vg1}
In the DigitMap you will place the following toward the end just before the final )
|**3(Mvg1)
The Gateway will be set up like this. You will notice the reference to SP2 in bold. That refers to service provider slot 2. It does not use service provider 2 but it does use some basic SIP settings from the service provider 2 configuration. That can be set to SP1 or SP2 but whichever one you pick MUST NOT be set as a Google Voice account because it needs those sip settings. So, if service provider 2 is Google Voice switch that line to
SP1(outbound.circlenet.us) instead.
Voice Services >>> Gateways and Trunk Groups
Voice Gateway1
Enable X
Name circlenet.us
AccessNumber SP2(outbound.circlenet.us)
DigitMap (xx.)
AuthUserID Circlenet Account number
AuthPassword Password
vtsnaab:
Thanks Gigcass - I will try this and post back.
I very much appreciate your willingness to be so helpful !!
Navigation
[0] Message Index
[*] Previous page