Simpler configuration using VG1 for Circlenet
giqcass:
Quote from: QBZappy on May 05, 2014, 07:07:23 pm
**5 is used to register the unit to the portal.
LOL that's why I don't know what it is! I don't use the portal.
Shale:
Thanks.
I my local call log, I am seeing this for my latest attempts:
From PH1 To PP1(19876543210; GW=tbound.circleneces)
I also tried a numeric IP, and initial 2 digits were missing from the log.
What seems more concerning, is the PP1.
This is using an OBi202.
Edit: Made progress by changing vg1 AccessNumber to "sp3(outbound.circlenet.us)". [My SP3 is set up for SIP.] Then got message that the number was rejected by the provider... It then proceeded to read off **7 followed by the phone number.
So I changed VG1 digit map to "(<**7:>xx.)", but that changed the error to fast busy. The logs show
To SP3(19876543210@outbound.circlenet.c)
21:36:23 Call Ended (403 Forbidden)
I will try later...
I am not doing anything with settings I did not mention. I think I need to go after this when I am fresher.
Shale:
In case there was something special about **7, I decided to change my prefix to 992.
After various things, here are my settings:
========begin new settings===========
Access Number:
sp4(outbound.circlenet.us)
Voice Gateway1 DigitMap
(<9921:1>[2-9]xxxxxxxxx|<992:1>[2-9]xxxxxxxxx)
AuthUserID and AuthPassword are filled in.
Enable is ticked. Name is Circlenet.
Phone 1 digit map:
(992xxxxxxxxxx|9921xxxxxxxxxx|[1-9]x?*(Mpli)|[1-9]S9|[1-9][0-9]S9|911|**0|***|#|##|**70(Mli)|**8(Mbt)|**81(Mbt)|**82(Mbt2)|**1(Msp1)|**2(Msp2)|**3(Msp3)|**4(Msp4)|**9(Mpp)|(Mpli))
Phone 1 Outbound call route:
{911:sp3},{933:sp3},{(Mvg1):vg1},{([1-9]x?*(Mpli)):pp},{(<#:>):ph2},{(<**82:>(Mbt2)):bt2},{(<**81:>(Mbt)):bt},{(<**8:>(Mbt)):bt},{**0:aa},{***:aa2},{(<**1:>(Msp1)):sp1},{(<**2:>(Msp2)):sp2},{(<**3:>(Msp3)):sp3},{(<**4:>(Msp4)):sp4},{(<**9:>(Mpp)):pp},{(Mpli):pli}
Per http://www.obitalk.com/forum/index.php?topic=4977.0 I made some more entries:
Voice Services -> SP4 Service -> Enable : (checked)
Voice Services -> SP4 Service -> AuthUserName : FakeName
Voice Services -> SP4 Service -> X_ServProvProfile : D
Voice Services -> SP4 Service -> X_RegisterEnable : unchecked
Service Providers -> ITSP Profile D -> SIP -> ProxyServer : 127.0.0.1
=========end new settings=============
Invoking quickdial which contains 9929876543210,
Where 9876543210 represents the 10-digit number being called.
Making the call {3 rising beep tones},
"the number 9929876543210 was rejected by the service provider, reason is 403". That means that there was no 1 injected before the 10-digit number as expected. So Voice Gateway1 DigitMap was not processed it appeared at first impression.
Yet in the OBi202 call history, I get
Call 1 05/06/2014 12:16:58
12:16:58 From PH1 To SP4(19876543210@outbound.circlenet.)
12:17:00 Call Ended (403 Forbidden)
What??? I note the 992 was removed and the 1 was inserted. So Voice Gateway1 DigitMap was processed.
I think I should give up on the VG1, and instead just put Circlenet on SP4. After all, if I am not trying to produce multiple caller IDs as classpro is doing on the big, thread, then what does using a VG do for me. But I thought I would pause for comments before making that move. Thanks.
giqcass:
My current config working. My Sp4 is a Callcentric account with no special settings. Please note I did not use "login username" for my auth user ID on the Voice Gateway. I used Circlenet Account number. Perhaps that will help.
Phone Port 1
DigitMap
([1-9]x?*(Mpli)|[1-9]S9|[1-9][0-9]S9|911|**0|***|#|##|**70(Mli)|**8(Mbt)|**81(Mbt)|**82(Mbt2)|**1(Msp1)|**2(Msp2)|**3(Msp3)|**4(Msp4)|**7(Mvg7)|**00(Mvg8)|**9(Mpp)|(Mpli))
OutboundCallRoute
{([1-9]x?*(Mpli)):pp},{(<##:>):li},{(<#:>):ph2},{(<**70:>(Mli)):li},{(<**82:>(Mbt2)):bt2},{(<**81:>(Mbt)):bt},{(<**8:>(Mbt)):bt},{**0:aa},{***:aa2},{(<**1:>(Msp1)):sp1},{(<**2:>(Msp2)):sp2},{(<**3:>(Msp3)):sp3},{(<**4:>(Msp4)):sp4},{(<**9:>(Mpp)):pp},{(Mpli):pli},{(<**00:>(Mvg8)):vg8},{(<**7:>(Mvg7)):vg7}
Voice Gateway7
Enable X
Name circlenet.us
AccessNumber SP4(outbound.circlenet.us)
DigitMap (xx.)
AuthUserID Circlenet Account number
AuthPassword Password
an outbound call for me using the gateway looked like this in call history.
To SP4(14198675309@outbound.circlenet.e)
Shale:
Quote from: giqcass on May 06, 2014, 03:01:37 pm
I used Circlenet Account number. Perhaps that will help.
That's it!!! Success first try after that change.
Both my 992 prefix (invoking VG1) and my **4 invoking SP4 work. I should look to simplify, but for now I will just be glad it works both ways.
Is your Callcentric SP one that does not use registration?
Navigation
[0] Message Index
[#] Next page
[*] Previous page