Attn=> Sam from CircleNet and/or Gigcass...please help ??

<< < (2/2)

Taoman:
Quote from: vtsnaab on May 06, 2014, 10:06:08 pm


It is most likely that 90% of incoming will use F9 and 90% of outgoing will use CircleNet.



Ok, I'll bite. Why would 90% of outgoing calls go thru CircleNet when you're already paying F9 for both incoming/outgoing calls?

vtsnaab:
I'll use both - but I do firmly believe in supporting small companies and CircleNet has shown clearly that they appreciate their clients & work dilligently at helping them.

Sam_from_CircleNet:
I see I'm late to this party, sorry I didn't respond earlier guys for some reason I scanned right past this thread. Gigcass thanks for the good solution!
Sam

giqcass:
It appears Future-nine has E911 support.  If you have set that up add {911:sp1}, to the OutboundCallRoute.  I believe everything else should work.  We may need to do some work on the Voice Gateway DigitMaps to speed up the dialing sequence.  I would like to know everything else works before we mess with that.

Physical Interfaces >>> Phone Port

OutboundCallRoute
{911:sp1},{([1-9]x?*(Mpli)):pp},{(<#:>):li},{**0:aa},{***:aa2},{(<**1:>(Msp1)):sp1},{(<**2:>(Msp2)):sp2},{(<**3:>(Mvg2)):vg2},{(<**8:>(Mli)):li},{(<**9:>(Mpp)):pp},{(Mpli):pli}

Navigation

[0] Message Index

[*] Previous page