November 15, 2018, 11:17:17 am *
Welcome, Guest. Please login or register.
News:
 
   Forum Home   Search Login Register OBiTALK  
Pages: [1]
  Print  
Author Topic: Attn=> Sam from CircleNet and/or Gigcass...please help ??  (Read 2822 times)
vtsnaab
Sr. Member
****
Posts: 283


« on: May 06, 2014, 07:24:50 pm »

I tried asking this in my other thread which has been spammed to death by trolls, so I am re-posting my query in hopes that one of you terrific & helpful folks might clear this up, please ??

I have searched (but may not know what to search for) and remain uncertain of how one sets up AND makes use of - separate outbound only services aside of SP1 & 2 on an Obi110.

I would like all of my outbound calls to use CircleNet and also to be able to choose Localphone every now and then instead.

Some clear, step-by-step directions, if possible would assuredly benefit many users in the upcoming change-over.

Thanks for any helpful replies !!!
Logged
Shale
Hero Member
*****
Posts: 1061


« Reply #1 on: May 06, 2014, 07:37:43 pm »

See http://www.obitalk.com/forum/index.php?topic=7916.0 reply 8.

Minimize moaning.
Logged
vtsnaab
Sr. Member
****
Posts: 283


« Reply #2 on: May 06, 2014, 08:24:46 pm »

The suggested info=>
My current config working.  My Sp4 is a Callcentric account with no special settings.  Please note I did not use "login username" for my auth user ID on the Voice Gateway.  I used Circlenet Account number.  Perhaps that will help.

Phone Port 1
DigitMap 
([1-9]x?*(Mpli)|[1-9]S9|[1-9][0-9]S9|911|**0|***|#|##|**70(Mli)|**8(Mbt)|**81(Mbt)|**82(Mbt2)|**1(Msp1)|**2(Msp2)|**3(Msp3)|**4(Msp4)|**7(Mvg7)|**00(Mvg8)|**9(Mpp)|(Mpli))

OutboundCallRoute
{([1-9]x?*(Mpli)):pp},{(<##:>):li},{(<#:>):ph2},{(<**70:>(Mli)):li},{(<**82:>(Mbt2)):bt2},{(<**81:>(Mbt)):bt},{(<**8:>(Mbt)):bt},{**0:aa},{***:aa2},{(<**1:>(Msp1)):sp1},{(<**2:>(Msp2)):sp2},{(<**3:>(Msp3)):sp3},{(<**4:>(Msp4)):sp4},{(<**9:>(Mpp)):pp},{(Mpli):pli},{(<**00:>(Mvg8)):vg8},{(<**7:>(Mvg7)):vg7}

Voice Gateway7
Enable         X
Name         circlenet.us
AccessNumber      SP4(outbound.circlenet.us)   
DigitMap         (xx.)
AuthUserID      Circlenet Account number   
AuthPassword            Password

an outbound call for me using the gateway looked like this in call history.
To SP4(14198675309@outbound.circlenet.e)
Appears to be for an Obi with SP3 & 4 whereas I am certain my Obi110 lacks those, hence my topic title asking those particular & very helpful folks to pitch in, please ??

Thanks.
Logged
giqcass
Hero Member & Beta Tester
*****
Posts: 1429


« Reply #3 on: May 06, 2014, 09:30:31 pm »

The instruction are the same basically.  
What service providers do you have set up on the Obi?  
Will Circlenet be used for dialing US destinations only?
Are there specific areas you plan to call with Localphone or do you plan to just dial an **3 to select it?

Voice Services  >>> Gateways and Trunk Groups
Voice Gateway1
Enable         X
Name         circlenet.us
AccessNumber      SP2(outbound.circlenet.us)   
DigitMap         (xx.)
AuthUserID      Circlenet Account number   
AuthPassword            Password


Go to
https://www.localphone.com/dashboard/internet_phone/
About half way down the page are the SIP ID and SIP Password for the next step.

Voice Services  >>> Gateways and Trunk Groups
Voice Gateway2
Enable         X
Name         localphone.com
AccessNumber      SP2(localphone.com)   
DigitMap         (xx.)
AuthUserID      SIP ID   
AuthPassword            SIP Password


Voice Services  >>> Gateways and Trunk Groups
Trunk Group1
Enable      X
Name       Outbound Route(optional)
TrunkList      vg1   (You can put backup service here as well.  vg1,sp1,sp2)
Digit Map    (xx.)  




Physical Interfaces >>> Phone Port
PrimaryLine = Trunk Group 1

DigitMap
([1-9]x?*(Mpli)|[1-9]S9|[1-9][0-9]S9|911|**0|***|#|**1(Msp1)|**2(Msp2)|**3(Mvg2)|**8(Mli)|**9(Mpp)|(Mpli))


OutboundCallRoute
{([1-9]x?*(Mpli)):pp},{(<#:>|911):li},{**0:aa},{***:aa2},{(<**1:>(Msp1)):sp1},{(<**2:>(Msp2)):sp2},{(<**3:>(Mvg2)):vg2},{(<**8:>(Mli)):li},{(<**9:>(Mpp)):pp},{(Mpli):pli}


Normal calls will go through Circlenet and dialing **3 before a number should route it through Localphone.  This setup does not address 911, 411, or voicemail.  Additional changes need to be made to the OutboundCallRoute and some possible optimizations to speed up dialing.

Hope I didn't miss anything.
« Last Edit: May 06, 2014, 09:37:52 pm by giqcass » Logged

Register at e164.org and friends can use Sipbroker to call you from a regular telephone for free from almost any country.
DDNS hack for OBi
Old OBi? Want Ring.to?
vtsnaab
Sr. Member
****
Posts: 283


« Reply #4 on: May 06, 2014, 10:06:08 pm »

Thanks Loads Gigcass !!!
What service providers do you have set up on the Obi? 
Will Circlenet be used for dialing US destinations only?
Are there specific areas you plan to call with Localphone or do you plan to just dial an **3 to select it?

SP1 is Future9 with a new local DID for incoming (& outgoing - but preferably not by default...)
Sp2 is Callcentric with a free NY DID for inbound, if needed - and very little or zero outbound usage.

Yes - all my calls are US calls only and selecting LP via **3 will be very helpful.

It is most likely that 90% of incoming will use F9 and 90% of outgoing will use CircleNet.
(I am not doing anything with my old GV stuff with the new providers.)

Does my description fit what you've described in your post ??

Thanks Again Gigcass.
Logged
Taoman
Hero Member
*****
Posts: 1145


« Reply #5 on: May 07, 2014, 09:05:28 am »


It is most likely that 90% of incoming will use F9 and 90% of outgoing will use CircleNet.


Ok, I'll bite. Why would 90% of outgoing calls go thru CircleNet when you're already paying F9 for both incoming/outgoing calls?
Logged
vtsnaab
Sr. Member
****
Posts: 283


« Reply #6 on: May 07, 2014, 09:32:07 am »

I'll use both - but I do firmly believe in supporting small companies and CircleNet has shown clearly that they appreciate their clients & work dilligently at helping them.
Logged
Sam_from_CircleNet
Full Member
***
Posts: 128


« Reply #7 on: May 07, 2014, 03:52:47 pm »

I see I'm late to this party, sorry I didn't respond earlier guys for some reason I scanned right past this thread. Gigcass thanks for the good solution!
Sam
Logged
giqcass
Hero Member & Beta Tester
*****
Posts: 1429


« Reply #8 on: May 07, 2014, 06:19:32 pm »

It appears Future-nine has E911 support.  If you have set that up add {911:sp1}, to the OutboundCallRoute.  I believe everything else should work.  We may need to do some work on the Voice Gateway DigitMaps to speed up the dialing sequence.  I would like to know everything else works before we mess with that.

Physical Interfaces >>> Phone Port

OutboundCallRoute
{911:sp1},{([1-9]x?*(Mpli)):pp},{(<#:>):li},{**0:aa},{***:aa2},{(<**1:>(Msp1)):sp1},{(<**2:>(Msp2)):sp2},{(<**3:>(Mvg2)):vg2},{(<**8:>(Mli)):li},{(<**9:>(Mpp)):pp},{(Mpli):pli}

« Last Edit: May 07, 2014, 06:21:10 pm by giqcass » Logged

Register at e164.org and friends can use Sipbroker to call you from a regular telephone for free from almost any country.
DDNS hack for OBi
Old OBi? Want Ring.to?
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.11 | SMF © 2006-2009, Simple Machines LLC