Change to non standard port like 5081 - asterisk

<< < (2/2)

yhfung:
Elviso,

I am able to other port number 10002 to connect one of ITSP in China, please take a look at the following link, which I believe, gives you some idea how to set up your Obi device.

http://www.telecom-cafe.com/forum/viewthread.php?tid=3511


YH

Elviso:
Dear RonR,

Any other thoughts?  Voice Services -> SPx Service -> X_UserAgentPort isn't it.  This can be set to anything and if I set the  ITSP Profile A -> Sip -> SIP Proxy Server Port to 5060 it works, if it's anything else does not work.

Maybe I need to call Obihai.

YH, I can get the obi working with 5060 so your link is not very helpful.  Maybe it's something with astersk 1.4, but considering that it works with the pap2 on port 5010, I just don't understand why the Obi doesn't work.

Elviso

obi-support2:
You only need to change ProxyServerPort (change OutboundProxyPort and RegistrarServerPort also only if you use those servers). Not necessary to change X_UserAgentPort which is your OBi's own SIP listening port.

Please capture a debug log (syslog) from your OBi and check if the OBi is sending out SIP register messages to the expected address:port. There are two FAQ under OBiTALK.com/FAQ - Troubleshooting section on how to capture syslog from the OBi. Make sure to turn on all SIP debug messages.

You can post the log here or attached it to an email to support@obihai.com.

Thank you.

Navigation

[0] Message Index

[*] Previous page