First, I should mention that I've been using my Obi100 with GV for about a year, with occasional problems, but 95% of the time it works fine. I was having problems transitioning to Vestalink/GV, so I did a factory restore and deleted the device and we have a completely clean slate, so here's the current problem.
I'm trying to add the Obi100 back into my Obitalk profile. However, I am unable to do this. I have a solid green light for power on the Obi, and the middle light, the web? icon, is flashing green quickly. No other lights.
"Please pick up the telephone handset, and dial **5 5963
• You may hang-up when you hear the automated response.
Trying to connect to your device... (Timeout in 115 seconds)"
"The number you have dialed **5 5963 has been sent to the server" However, it counts down to 0 and the Obitalk page says "Failed to connect to your device. Please check your device's internet connection"
The internet connection is fine. I get the IP address of 192.168.0.106 when I dial ***1. I CANNOT call **9-222-222-222. The recording responds "there is no service available to complete your call."
Again, it's worth mentioning I had this Obi100 working for about a year, same router, Ethernet cord, handset, etc. So I know it's capable of working with my router, it's just especially fussy today. Router is an Archer C7 AC1750. For good measure, today I set the DMZ status to "enable" and set it's IP address to the Obi100's (192.168.0.106).
I can only access the Obi100 through the Obitalk portal. If I attempt to access it through the IP address in my browser, nothing happens (page won't load/page not found).