Obi-to-Obi and then make a domestic call

[gp_45]

I have Obi100 (call it Obi1) in US and another Obi100 (call it Obi2) in an international location. Both Obis are in each other's circle of trust.

I am able to make Obi to Obi calls without any problems. I have PhonePower setup on SP1 of Obi1 in the US.

Now my question is... is there a way for Obi2 to make a Obi-to-Obi call to Obi1 and then using the phonepower account on Obi1, make a domestic US call? What are the settings I need to change? Thank you.

[azrobert]

In OBi100-1:

Change Voice Services -> OBiTalk Service -> InboundCallRoute to:
{>(1xxxxxxxxxx):sp1},{ph}

In OBi100-2:

Change Voice Services -> OBiTalk Service -> DigitMap to:
(<ob>222222222|obxxxxxxxxx|<1*:ob200111111*>1xxxxxxxxxx)

ob200111111 is the OBi number of the OBi100-1.

Add to the beginning of the Physical Interfaces -> Phone Port DigitMap:
1*1xxxxxxxxxx|
It should look like this:
(1*1xxxxxxxxxx|........Current Rules........)

Add to the beginning of the Physical Interfaces -> Phone Port OutboundCallRoute:
{(Mpp):pp},

Dial 1*18005551212

[azrobert]

At the international location a 10 digit number with a 1 prefix should be unique. If it is do the following instead of my 1st post.

In OBi100-1:

Change Voice Services -> OBiTalk Service -> InboundCallRoute to:
{>(1xxxxxxxxxx):sp1},{ph}

In OBi100-2:

Change Voice Services -> OBiTalk Service -> DigitMap to:
(<ob>222222222|obxxxxxxxxx|<ob200111111*>1xxxxxxxxxx)

ob200111111 is the OBi number of the OBi100-1.

Add to the beginning of the Physical Interfaces -> Phone Port DigitMap:
1xxxxxxxxxx|
It should look like this:
(1xxxxxxxxxx|........Current Rules........)

Add to the beginning of the Physical Interfaces -> Phone Port OutboundCallRoute:
{(Mpp):pp},

Dial 18004441212