Help with digimap syntax...

<< < (3/3)

azrobert:
It is a newbie question, but you don't have to apologize. There have been some really dumb questions asked on the forum.

I don't know what you tried, but you need to leave the Primary Phone Port Line set to the default of PSTN.

The following will route 11 digit US numbers and international numbers to SP1.
Everything else will be routed to the Line Port.

Physical Interfaces -> Phone Port
Add the following to the beginning of the OutboundCallRoute:
{(1xxxxxxxxxx|011xx.):sp1},

Are you dialing 10 digit numbers?
If you are the Line DigitMap needs to change to eliminate a 10 second pause.

Physical Interfaces -> Line Port
Replace the DigitMap with the following:
(xxxxxxxS4|xxxxxxxxxx)

Add any other rules you may need.
911 is handled separately.

You need to use OBi Expert to make the above changes.

Navigation

[0] Message Index

[*] Previous page