How to call GV voicemail using Phonepower?
S2SinNC:
Does anyone know how I you call your GV voicemail box from the PhonePower number (post GV shut off)?
I currently have PhonePower set up as SP1 with "Primary Line for Outgoing Calls" checked. I have GV configured in the SIP2 location. I have the PhonePower number spoofed to show the GV number on outbound calls.
Because I still have GV configured on the Obi, I can still call my GV Voicemail over Obi by dialing **2, then my GV phone number (because dialing *98 to get GV voicemail wont work unless GV is in SP1 slot).
Once GV really stops working over Obi, how will I be able to call my GV Voicemail from by Obi devices? I've tried it and by calling my GV phone number (without dialing **2) and I get an error message stating that the number dialed was rejected by service provider for reason #487. I suspect that is because the number is spoofed and I have the VM pin turned off when calling from the home number.
gderf:
You cannot call your Google Voice number from a phone that identifies itself as your Google Voice number.
psuPete:
I believe I have been calling my GV VM from my OBi spoofed telephone # for years. At this point, I am not 100 % sure which GV config options (SETTINGS) allows me to do that or even if I did.
The format of my GV # is
(nnn) nnn-nnnn
I do not know how well GV would parse other formats of CLID. I am calling from my OBi/GV SP1 port.
gderf:
Calling your Google Voice number from an OBi configured to use the Google Voice port for that call is not the same thing as calling it from an OBi configured to use a SIP provider on another port.
The call from the SIP port will be rejected by Google Voice if it has its CLID set to the same number you are dialing.
azrobert:
Can Phonepower do the following?
http://www.obitalk.com/forum/index.php?topic=7890.0
Navigation
[0] Message Index
[#] Next page