Obi110 phone port primary line setting not persistent

(1/1)

ammoun:
Hello,

I choose PSTN from the drop down menu, reboot then save and the setting goes back to SP1. Could anyone think of a different setting that explains this behavior? I want to make sure the default outgoing line is PSTN. Thanks

azrobert:
Configuring your OBi via the web interface might be the cause of your problem. If you don't turn off auto-provisioning ObiTalk will overlay your changes.

This is how to disable auto provisioning if you use the web interface:
System Management => Auto Provisioning

Under OBiTalk Provisioning:
Method: Disabled.

ammoun:
Thanks for your answer, you made me think of other ways I could make changes.

I applied the changes from the web interface from a local computer in the same network

When I logged in from Obitalk website in the expert mode, I found an exclamation mark:



I didn't change the auto provisioning yet but could you tell me if few words what that setting is useful for please? I looked online but still in doubt.

One more thing, What is the other way to change the default PSTN setting if not from the web interface please?

Thanks!

azrobert:
You can only provision the OBi using one method.
If you use the Web interface OBiTalk auto-provisioning must be disabled.
If you use OBiTalk then auto-provisioning must be enabled.
See:
http://www.obitalk.com/forum/index.php?topic=92.0

To change Primary Line via OBiTalk:
To the right of Primary Line Uncheck OBiTalk Setting
The Box under Device Default will become checked.
Uncheck Device Default.
Make your change.
I don't use OBiTalk. I think you just click Save next.

Navigation

[0] Message Index