Dial Plan & Star Codes

<< < (2/2)

VirtualMonitoring:
Typical - I read your post a few minutes too late and now have my Obi100 rebooting every 15 seconds.

I can't find any reference to using the hardware reset button - is there any specific method of doing it?

I'm not having much luck and don't want to make things worse.

RonR:
Keep it depressed for at least 10 seconds until the OBi reboots.  Then the unit should be back at factory defaults.

VirtualMonitoring:
Thanks - that worked perfectly on both devices. It took about 12 seconds and the power light started flashing yellow a couple of times per second. I then let go of the reset button and a few seconds later everything was back to factory defaults.

 ;D OK - off I go again.....

Navigation

[0] Message Index

[*] Previous page