911S0 vs 911S1 dial plan

(1/1)

cj4331:
So if I understand correctly the short timeout is 2 seconds and 911S0 is the same as 911 in the dial plan--which should then result in a 2 second delay before dialing.  So correct me if I'm wrong the best thing to do for fast 911 response is include 911S1 in my dial plan?

drgeoff:
My understanding is not the same as yours.  S0 means an interdigit timer of 0 seconds so will match immediately the 2nd '1' of '911' is received by the Obi.

cj4331:
drgeoff,

I found on page 197 of http://www.obihai.com/docs/OBiDeviceAdminGuide.pdf the following statement:

S, S0, S1, S2, …S9 - Digit timer of 0, 1, 2, …,9 seconds respectively; S is equivalent to S1; S0 is the same as “blank”.

Before reading this I thought the same thing as you.  Now I'm not sure.

Navigation

[0] Message Index