Obhai100 alternate red and green

(1/1)

KumarK:
I started seeing alternate red and green. So I updated the firmware, rebooted. Still it is doing the same.

I tried the above method for total four times, no luck. No dial tone.

I tried another method disconnecting the power, pressing the reset button with a pin for 30 seconds, connect the power and press the reset button for another 30 seconds, still no luck. No dial tone.

Please advise.

cluckercreek:
Press the reset button with the power off, hold in the button and turn on the power. Continue holding until the light starts flashing rapidly then release.

KumarK:
No luck. I still see alternate red and green light after doing the reset as explained above.

ceg3:
Just to have it in your tool bag, ***81 does a reset of your OBi.  It's a reset, not a restart.

KumarK:
I power off this for two days, and few min ago I turned it on to try again. Surprisingly before I do anything, it started working fine :)

Navigation

[0] Message Index