News:

On Tuesday September 6th the forum will be down for maintenance from 9:30 PM to 11:59 PM PDT

Main Menu

Obhai100 alternate red and green

Started by KumarK, July 11, 2014, 11:48:13 AM

Previous topic - Next topic

KumarK

I started seeing alternate red and green. So I updated the firmware, rebooted. Still it is doing the same.

I tried the above method for total four times, no luck. No dial tone.

I tried another method disconnecting the power, pressing the reset button with a pin for 30 seconds, connect the power and press the reset button for another 30 seconds, still no luck. No dial tone.

Please advise.

cluckercreek

Press the reset button with the power off, hold in the button and turn on the power. Continue holding until the light starts flashing rapidly then release.

KumarK

No luck. I still see alternate red and green light after doing the reset as explained above.

ceg3

Just to have it in your tool bag, ***81 does a reset of your OBi.  It's a reset, not a restart.

KumarK

I power off this for two days, and few min ago I turned it on to try again. Surprisingly before I do anything, it started working fine :)