December 18, 2017, 03:03:47 am *
Welcome, Guest. Please login or register.
News:
 
   Forum Home   Search Login Register OBiTALK  
Pages: [1]
  Print  
Author Topic: any successor that can replace OBiON for andriod?  (Read 36919 times)
hn4498
Newbie
*
Posts: 1


« on: July 15, 2014, 02:35:22 am »


Any others apps that can dial **9 which it can replace Obion completely?

Peter
Logged
azrobert
Hero Member & Beta Tester
*****
Posts: 3204


« Reply #1 on: July 19, 2014, 08:34:16 am »

You asked your Android question under iPhone support.
CSipSimple is only for Android.
The following was copied/modified from another post.

First, I don't want to take any credit for this solution. This is all ianobi's creativity. See:
http://www.obitalk.com/forum/index.php?topic=4647.0

Create a free Sip2Sip account here:
https://mdns.sipthor.net/register_sip_account.phtml

Install CSipSimple on your Android.

In CsipSimple:
Select Add Account
Select the Basic Wizard. It's near the end of the list.

Account Name: Anything
User: Sip2Sip_ID
Server: sip2sip.info
Password: Sip2Sip_PW
Save

Select Menu on phone
Select Settings
Select Filters
Select your newly created Account
Select add filter
Select 1st entry (Can't call) and change it to Rewrite.
Select 2nd entry (Starts with) and change it to All.
Select 3rd entry (Replace...) and change it to Suffix With.
4th entry: @xx.xx.xx.xx:5061
save

Sip2Sip_ID and Sip2Sip_PW are the name and password you selected when you created your account.
xx.xx.xx.xx is your public IP address assigned to your modem by your ISP.
5061 is the UserAgentPort of SP2.
If you're not using SP2 then change 5061 to the corresponding SP port#.
You MUST dial from the Android Dialer and not the CSipSimple Dialer.
Filters won't work from the CSipSimple dialer.

Configure OBi
Voice Services -> SP1 Service
X_InboundCallRoute: {ph,sp2(Sip2Sip_ID@sip2sip.info;ui=$1)}

Voice Services -> SP2 Service
X_InboundCallRoute: {Sip2Sip_ID>0:ph},{Sip2Sip_ID>(1xxxxxxxxxx):sp1},{ph}

This assumes your service provider is defined on SP1 and SP2 is defined as SIP.
You need to port forward 5061 in your router to the OBi's IP address.
IF you have audio problems you will also have to port forward RTP ports 16800 thru 16998.
That's 199 ports.
See: Service Providers -> ITSP Profile A -> RTP -> LocalPortMin/Max
Use Port Range Forwarding to avoid having 199 entries in you router.

Dialing 14805551212 will be routed out SP1.
Dialing 0 will ring the OBi phone port.
Inbound calls will ring the OBi phone port and your Android.

If SP2 is not defined, setup a dummy SIP definition like this:
Service Providers -> ITSP Profile B -> SIP -> ProxyServer : 127.0.0.1
Voice Services -> SP2 Service -> AuthUserName : (any userid)
Voice Services -> SP2 Service -> X_RegisterEnable : (unchecked)
Voice Services -> SP2 Service -> X_ServProvProfile : B


« Last Edit: January 13, 2015, 11:38:30 am by azrobert » Logged
vtsnaab
Sr. Member
****
Posts: 258


« Reply #2 on: January 31, 2015, 06:22:16 am »

Wow - now I feel truly well informed about this other way of doing things - thanks for posting the link to this post Azrobert, and for your other highly informative reply !!

For anyone wishing a very easy method to use an Android phone via Wifi & GV, another option is Acrobits Softphone.
It is not free, but does allow very normal usage of GV over Wifi with great ease pretty much anywhere that a good Wifi signal can be had.

Combining Acrobits Softphone with a $20 (non-activated PAYG) Android phone allows me to make all the calls I want when out & about very easily.
Logged
Juste
Jr. Member
**
Posts: 25


« Reply #3 on: October 26, 2015, 09:53:42 pm »



Select Menu on phone
Select Settings
Select Filters
Select your newly created Account
Select add filter
Select 1st entry (Can't call) and change it to Rewrite.
Select 2nd entry (Starts with) and change it to All.
Select 3rd entry (Replace...) and change it to Suffix With.
4th entry: @xx.xx.xx.xx:5061
save


Hello,

How would you do that with Zoiper ?
There is a Number Rewriting option but I don't know how to deal with it.

Thanks,
Logged
ianobi
Hero Member & Beta Tester
*****
Posts: 1828


« Reply #4 on: October 27, 2015, 07:00:50 am »

Zoiper for android (and I assume iphone) is capable of sip uri calling. However, its number rewriting functions are basic - replacing "+" with country code etc. For easy converting straight numbers into sip uri calls you need the "Filters" function that CSipSimple provides. It can automatically add any suffix such as "@mydynamicdns.com:5061" to direct calls to the correct sp of your OBi.

To use zoiper for sip uri calls you need a voip account registered on your zoiper phone that accepts sip uri calls. Then save contacts or type in the dialler window the format:

sip:12345678901@mydynamicdns.com:5061

Where 5061 is the UserAgentPort of the required OBi spX - say sp2 in this case. Then you would need to set up the OBi sp2 InboundCallRoute to route the calls out via whichever spX you wish. Alternatively, simply set up one contact that connects to your OBi Auto Attendant and use that to route calls as you wish.
Logged
Juste
Jr. Member
**
Posts: 25


« Reply #5 on: October 27, 2015, 08:31:37 pm »

Thanks.

I guess sipsorcery.com can help me replace both Sip2Sip and CSipSimple ?
Logged
ianobi
Hero Member & Beta Tester
*****
Posts: 1828


« Reply #6 on: October 28, 2015, 06:40:35 am »

I don't know enough about sipsorcery to give a definite answer. If it provides a softphone app for your android device and allows sip uri calling, then it should work. Although it would still need to provide very flexible number rewriting on the softphone app.

I'm happy to use CSipSimple and sip2sip as they are both free and mostly reliable. If you find a free wifi hotspot, then you can route calls from your android device anywhere in the world to your OBi for free and then onwards using your OBi services.

Having said all that I would not write off OBiON completely. It is clunky and is in severe need of updating, but it still works on my Galaxy S4.



Logged
drgeoff
Hero Member & Beta Tester
*****
Posts: 2738


« Reply #7 on: October 28, 2015, 10:14:07 am »

Sipsorcery does not provide a softphone.  It is a "switch in the cloud" with similar functionality to PBXes or Asterisk.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.11 | SMF © 2006-2009, Simple Machines LLC