Obi110 setup for VOICEMAIL access to LINE - local PBX system

<< < (2/2)

giqcass:
Quote from: azrobert on July 27, 2014, 03:57:56 pm

giqcass,

I believe you coded to Star Code correctly, but there is a bug in the firmware and it will fail.

I think that was discussed somewhere before however I forgot about it. 

Quote from: azrobert on July 27, 2014, 04:28:27 pm

Try changing Physical Interfaces -> Phone Port
HookFlashHandling to: Send Hook Flash to PSTN

@searchformission
Let us know if that works for you.

searchformission:
I didn't change anything besides this:
HookFlashHandling to: Send Hook Flash to PSTN

Now, by pressing # to switch to the local PBX via LINE, and pressing FLASH (even tried with double FLASH), I was able to reach the auto-attendant. But still, not the voicemail yet. I will play around a little more and see what happens.

At least, with this change, I got somewhere. For your information, my Obi110 is on the v2.8 hardware and v1.3.0 (Build: 2824)

Navigation

[0] Message Index

[*] Previous page