Call history: From '100' SP1(100)

(1/3) > >>

andrea:
I've been using an OBi202 for over a year without any problems (so far). My provider is voip.ms. I use two phone numbers, SP1 and SP2, each using its own physical interface, Phone1 and Phone2.

Everything was working fine until a few days ago when I had to replace my router. I now use a Netgear R6250 router.

Now, several times a day, Phone1 rings for no reason. In call history, the description is always the same: From '100' SP1(100) - To PH1.

What is going on and how can I fix it?

Thank you for your help.

andrea:
I may have found the answer in another post: change the X_UserAgentPort to 5070 for SP1. Will report back...

andrea:
So far, so good. Not a single call from "100" since I changed the X_UserAgentPort to 5070.

Mango:
You should also navigate to your router's configuration, and select Advanced > Setup > WAN Setup.  Look for NAT Filtering, and if it set to Open, change it to Secured.  Let us know if you're able to do this, or if my guess was wrong and it is already set to Secured.

There have been reports of the SIP scanners finding devices, even on alternate ports.

andrea:
NAT Filtering is already set to Secure on the router.

Still not a single call from "100" since I changed the port.

Looks like the issue is solved.

Thanks!

Navigation

[0] Message Index

[#] Next page