UK Configuration XML Files
terraprime:
I have just done a test call to my mobile and the first call worked, so i hung up then called the number again, I answered the second call but only had one way audio.
It seems like the first call did not disconnect or something odd.
Could it be an dial plan issue or a disconnect issue?
azrobert:
You can place an "S1" after any rule.
The rules not ending in "?" or "." should only have a 2 second delay.
Do you have an OBi2xx?
If yes, you can change the global short and long timer values then you don't need the "S1" suffix.
Physical Interfaces -> Phone Port
DigitMapLongTimer: 1
DigitMapShortTimer: 1
Maybe the prefix causes problems with 0800 numbers.
Try removing the prefix for these.
Did you verify the call to your mobile was routed with the prefix?
If it had the prefix, maybe the LP fix doesn't work.
terraprime:
;D
So I am pleased to say @azrobert that you have assisted me a million times more than anyone at Obitalk! You should be offered a job by them for all your great work here.
I have now fully resolved the issues and all thanks to your help.
Here is what I have done to get the Obi202 fully up and running correctly.
1, Set the the Obi in the DMZ of my Netgear router - This stopped my one way audio issues.
2, Uploaded the latest xml from this page to my Obi
3, Changed the digi map for phone port to the following:-
(999|112|101|111|<*>1571|116000|116111|116123|1471|*1571|<*1688>0[15]xxxxxxxxx?|*16880[15]xxxxxxxxx?|<*1688>0[27]x xxxx xxxx|*16880[27]x xxxx xxxx|<*1688>0800xxx xxxx?|*16880800xxx xxxx?|<*1688>0808xxx xxxx|*16880808xxx xxxx|<*1688>08001111|*168808001111|<*1688>08[47]x xxx xxxx|*168808[47]x xxx xxxx|<*1688>0845464x|*16880845464x|<*1688>03xx xxx xxxx|*168803xx xxx xxxx|118xxx|100|155|195|<*1688>09xx xxx xxxx|*168809xx xxx xxxx|<*1688>00xxx.|*168800xxx.|<*1688>xx.|*1688xx.|<*1688>+xx.|*1688+xx.|(Mipd)|[^*#]@@.)
The digitmap above now allows me to call my Localphone voicemail on *1571 and also routes the majority of calls via the localphone *1688 path automatically.
4, Shortened the time it takes for the call to start to ring by changing the Digit Map time to the following:-
Physical Interfaces -> Phone Port
DigitMapLongTimer: 1
DigitMapShortTimer: 1
I have tested this by call 0800500005, disconnecting when it answers and immediately redialing, I this this several times within a minute and every call connected. This did not happen for me without the changed you assisted with.
I would say the issue has now been solved, but will wait a few days just in case something goes wrong.
I hope that this will assist other people in the future who may experience the same issues.
Thanks once again@azrobert.
KevindUK:
Hi,
Yes I had the same problem with LocalPhone, support was quick though back to me in 18 hours, suggesting I implement the *1688 prefix.
I followed guide here, reset to factory defaults, added UK XML, changed dial-plan and it works.
Thanks Guys.
alan-uk:
Just like to say thank you for this UK config file. Just installed it on my Obi110.
Alan
Navigation
[0] Message Index
[#] Next page
[*] Previous page