Setting for outgoing call to ring longer

(1/1)

firass:
I have an OBi100 connected to a SIP provider. When I place a call, it seems like if the call rings for more than a minute, I get a message (I believe from the OBi, I've never gotten this from my SIP provider before) and the phone call ends.

Ideally, I'd like to make this timeout around two-minutes (or ring indefinitely)

I've been looking through the OBiDeviceAdminGuide PDF and it seems to be a little different than what I see on my device.

I've also been looking at all the various settings and nothing has jumped out at me. If anyone can point me in the right direction, I'd be grateful.

QBZappy:
firass,

Hi, not sure what message you are getting. Can you be more specific. I don't know that the OBi will give any messages after ringing for a minute.

obi-support2:
You can set this OBi parameter:

ITSP Profile A/B - SIP - InviteExpires to 120 (seconds, for 2 min).

Default is 60s, hence your experience.

You can try to set it to 0, for unlimited ringing (i.e., let your ITSP decide when to timeout).

Thank you.

Navigation

[0] Message Index