December 14, 2017, 06:25:30 pm *
Welcome, Guest. Please login or register.
News:
 
   Forum Home   Search Login Register OBiTALK  
Pages: [1] 2
  Print  
Author Topic: OBi110 firmware updated Aug-24-2014 to Ver 1.3.0 (Build 2872)  (Read 95546 times)
bluechip
Newbie
*
Posts: 18


« on: August 24, 2014, 02:23:20 pm »

Dashboard just updated my OBi110 firmware.

Hardware Version   3.4
Software Version   1.3.0 (Build: 2872)

Seems to work fine...
 Smiley
Logged
LeoKing
Full Member
***
Posts: 176



« Reply #1 on: August 24, 2014, 03:08:21 pm »

My 2 OBi110's (HW ver 3.4) are still on 1.3.0.2868 and I was not prompted to update the firmware.
Logged
RFC3261
Full Member
***
Posts: 129


« Reply #2 on: August 24, 2014, 05:52:39 pm »

My 2 OBi110's (HW ver 3.4) are still on 1.3.0.2868 and I was not prompted to update the firmware.

If you try to activate a new SP specifying GV, it will force an update (presumably so that it can use the new authentication framework).
Logged
Huib
Jr. Member
**
Posts: 53


« Reply #3 on: August 25, 2014, 08:40:37 am »

The latest one available for general download seems to be build 2824. Any idea what the URL is for the newer build(s)?
Logged
Huib
Jr. Member
**
Posts: 53


« Reply #4 on: September 07, 2014, 02:49:53 pm »


Thanks, but that link gives me a 404, page not found.
Logged
SteveInWA
Hero Member & Beta Tester
*****
Posts: 3968



« Reply #5 on: September 07, 2014, 03:30:18 pm »

I suspect that Obihai is having server problems this weekend.  Try again in a couple of days.  Or, press ***6 on your attached telephone to check for an update.
Logged

Taoman
Hero Member
*****
Posts: 943


« Reply #6 on: September 07, 2014, 03:47:27 pm »


Thanks, but that link gives me a 404, page not found.

This should work better for you:

http://fw.obihai.com/OBi110-1-3-0-2872.fw
Logged
Huib
Jr. Member
**
Posts: 53


« Reply #7 on: September 07, 2014, 04:26:57 pm »


This should work better for you:

http://fw.obihai.com/OBi110-1-3-0-2872.fw

Yup, it sure does Smiley Thanks
Logged
Newbie
Newbie
*
Posts: 3


« Reply #8 on: September 11, 2014, 11:41:37 am »

I just updated to Ver 1.3.0 (Build 2872) posted in this thread and now the GV service I had configured and working on SP1 shows "Service Not Configured" although all the parameters seem unchanged.

The voip.ms service I had configured on SP2 seems unaffected and is still working.

I tried to go back to the older firmware I was running and got "Firmware downgrading is prohibited ". I hate when companies do that but rather than vent, I'd like to get things working again.

Any solutions/suggestions deeply appreciated.
Logged
Cajun1
Newbie
*
Posts: 5


« Reply #9 on: September 11, 2014, 04:18:56 pm »

Hi, how can I see my current firmware level? Thanks much.
Logged
RFC3261
Full Member
***
Posts: 129


« Reply #10 on: September 11, 2014, 08:33:40 pm »

Hi, how can I see my current firmware level? Thanks much.

There are probably other ways, but can either use a web browser, and connect to your Obi direction (http://<ip_address>) which shows you the system status, and a bit down the page, the firmware level, or you can use expert mode from the Obitalk and from the left panel, select status/system_status) which shows you the same info (sometimes I have found you have to refresh the system status a few times due to timeouts).
Logged
antani1971
Newbie
*
Posts: 11


« Reply #11 on: September 12, 2014, 12:03:20 am »

anybody knows the change log for this? I never solved the random caller ID detection problems I am having here and I hope that a fix may improve the behavior
Logged
ProfTech
Sr. Member
****
Posts: 375


« Reply #12 on: September 12, 2014, 04:06:05 am »

I believe that to enable the new Google format you must:
1. Delete your device from the portal
2. Do a paper clip reset on your Obi
3. Add your device back at the portal
4. Select Google as the service provider for sp1. Haven't been through the procedure yet so can't give details.
5. Add your service provider back on SP2. You will need your password info

The whole process shouldn't take more than 30 minutes.
Logged
RFC3261
Full Member
***
Posts: 129


« Reply #13 on: September 12, 2014, 09:59:07 am »

anybody knows the change log for this? I never solved the random caller ID detection problems I am having here and I hope that a fix may improve the behavior

Obi has been a bit lax regarding changelogs for their recent firmwares (i.e. not providing them at all).  Even when provided, there are examples of a single line that says "Various bug fixes (and enhancements)", which has not been helpful to know if your particular issue has been addressed.  This (lack of detailed changelog) is not unique to Obi (unfortunately).  To do better would require assigning an engineer to sanitize the details of the bugs fixed in a way meaningful to those not steeped in the internal codes (and hide details of specific customers).  And while I would like better changelogs (and I would also like a list of bugs that are known, and will eventually be addressed), I understand that the engineers priority would be to work on fixing bugs (and creating enhancements) rather than satisfying my curiosity.
Logged
BigJim_McD
Full Member
***
Posts: 190



« Reply #14 on: September 12, 2014, 10:57:53 am »

I was able to reconfigure Google Voice on my OBi202, OBi110 and OBi100 without deleting my device from OBiTalk and without resetting the OBi devices.  After the update to OBiTalk method for provisioning Google Voice, I went into SP2 on each of the devices, when I attempted to update and save changes I was prompted to complete the firmware update.  After the firmware update was completed, I was able to update the Google Voice configuration on SP2 using the new method. 

The ability to update the Google Voice configuration without deleting my devices from OBiTalk was a much appreciated time saver as I have multiple VoIP service providers on each of the devices.  The OBi202 has Vestalink on SP1, Google Voice on SP2, VoIP (for Home #) on SP3 and VoIP (for Home Office) on SP4.
Logged

BigJimMcD
Cajun1
Newbie
*
Posts: 5


« Reply #15 on: September 12, 2014, 11:41:09 am »

Thanks RFC, for the info to be able to see my IP address.
Logged
FameWolf
Newbie
*
Posts: 7


« Reply #16 on: September 13, 2014, 11:10:03 pm »

I have both an obi100 and an obi200 that have google voice as SP1 and callcentric as sp2....I never deleted google voice...when I try to go and edit the settings I get notified I need to do a firmware update...I allow it...time goes by and it notifies me that it failed...rinse lather repeat on the other device....oh and ***6 says no update available on both devices.   Way to go obihai!

Logged
SteveInWA
Hero Member & Beta Tester
*****
Posts: 3968



« Reply #17 on: September 14, 2014, 01:30:36 am »

I have both an obi100 and an obi200 that have google voice as SP1 and callcentric as sp2....I never deleted google voice...when I try to go and edit the settings I get notified I need to do a firmware update...I allow it...time goes by and it notifies me that it failed...rinse lather repeat on the other device....oh and ***6 says no update available on both devices.   Way to go obihai!



Delete your devices from the OBiTALK portal, then factory-reset them, and add them back to the portal.  When you configure Google Voice again, it should download the new firmware successfully.

<edit>  I actually just tried this on my ancient, hardware version 2.8 OBi 110.  It upgraded to the version before 2872 (sorry, I forgot to write it down).  I had to manually update it by downloading the firmware file ( http://fw.obihai.com/OBi110-1-3-0-2872.fw ) and using the local web interface.  So, YMMV, but in the end, it can be updated.
« Last Edit: September 14, 2014, 03:52:11 am by SteveInWA » Logged

mascasa
Newbie
*
Posts: 2


« Reply #18 on: October 01, 2014, 05:55:13 pm »

Ever since I was forced to upgrade, my Obi 110 v2.8 will not phone home to Obi or work at all. I deleted it from ObiTalk and have hard reset, soft reset, you name it. A tcpdump below shows the only traffic generated by the device...

19.268590 arp who-has 192.168.2.114 tell 192.168.2.114
19.518773 arp who-has 192.168.2.114 tell 192.168.2.114
20.635648 arp who-has 192.168.2.5 tell 192.168.2.114
21.728723 arp who-has 192.168.2.1 tell 192.168.2.114
21.729160 192.168.2.114.10000 -> 54.241.160.4.10000: udp 46
21.730977 192.168.2.114.10000 -> 54.241.160.4.10000: udp 94
22.220542 192.168.2.114.2656 -> 74.122.204.5.123: udp 48
26.838646 arp reply 192.168.2.114 is-at 9c:ad:ef:ff:b:c

Any ideas? Support has been less than helpful.
Logged
ProfTech
Sr. Member
****
Posts: 375


« Reply #19 on: October 03, 2014, 01:29:34 pm »

I saw a post I think on this forum from Obi that gave the steps to load firmware into a bricked Obi. Can you access the admin page(s) using a crossover cable? I would try installing build 2872 that way and see what happens. You may want to look for the post from Obi first, though. Can't remember the exact steps.

*edited* If your power light is flashing red/green go here to follow the instructions & load 2872.
http://www.obihai.com/support/troubleshooting/alt
« Last Edit: October 03, 2014, 01:34:51 pm by ProfTech » Logged
Pages: [1] 2
  Print  
 
Jump to:  

Powered by SMF 1.1.11 | SMF © 2006-2009, Simple Machines LLC