OBI 110 Netherlands (Holland) settings
hetkapitein:
Changing the ringer voltage and wave form unfortunately had no affect for the inbd.
otbd. i have a dial tone, can make DTMF touch pad inputs, but it simply never establishes a connection, and after about 20s I get the dial tone again.
drgeoff:
When you look at the call history, the right hand column shows where the call went, For incoming calls that should be "PHONE". My call to you did ring your phone. Are the other incoming calls also showing "PHONE"?
To check the connection to your PSTN line, dial a single #. You should get the dial tone from your PSTN exchange and be able to dial a number and make a call just as if the phone was connected directly to the PSTN line.
drgeoff:
Quote from: hetkapitein on August 26, 2014, 01:18:34 pm
Changing the ringer voltage and wave form unfortunately had no affect for the inbd.
otbd. i have a dial tone, can make DTMF touch pad inputs, but it simply never establishes a connection, and after about 20s I get the dial tone again.
I deleted that suggestion as we already established that the OBi110 can ring your phone. I assume it did ring when I called you via Obitalk.
hetkapitein:
hi
thanks for the continuing input.
yes, when you called via obitalk, the phone rang as normal and I could see your obitalk number in the caller ID.
when I dial # via PSTN I am able to successfully establish a dial tone. However it will not dial out.
hetkapitein:
your inbd OBiTalk call was routed to PHONE 1.
I have no other established inbd. calls in the log from outside lines. When I try to call in I receive the ringing tone on my mobile, but the house landline does not activate :(
Navigation
[0] Message Index
[#] Next page
[*] Previous page