OBI 110 Netherlands (Holland) settings
hetkapitein:
Further....
I have just completely rest the OBI to factory default and removed the Anveo account via OBItalk.
I can call the OBI echo test OK.
However I can not dial out. I have a dial tone, the numbers dial, there is about 20s of silence with some scratching noise and then I get the dial tone again.
Somethings not good :(
drgeoff:
1. You have't yet satisfied me that you have looked at the OBi's call log.
2. If you were in the UK I'd tell you to look to the the adaptor(s) between the UK style phone plugs and the US type on the OBi. Are you using any adaptor(s) in your setup?
drgeoff:
I called your Obitalk number* and you answered. So your telephone handset connection to the OBi110 is OK.
* Might not be a good idea to leave that visible in your forum post. >:(
hetkapitein:
Quote from: drgeoff on August 26, 2014, 12:35:16 pm
I called your Obitalk number* and you answered. So your telephone handset connection to the OBi110 is OK.
* Might not be a good idea to leave that visible in your forum post. >:(
Hi.
Thanks - that was a strange one, but the idea is appreciated.
So weve established I can receive incoming obi calls, great :) Ill edit that number out of my original post now.
hetkapitein:
Further:
No adaptors being used. NL plugs are RJ11.
There are calls logged in my OBI call list, showing inbound and outbound via PHONE1, LINE1 and OBItalk1. Some show as busy and some as connected, however the reality (on the phone) is that its a dead line, or appears to connect for inbd. calls, but never rings at the handset.
Im sure its just simple settings that need changing to match the NL system, which is why I emailed OBI support. Im sure I cant be the first NL based OBi customer to try and get things working.
Navigation
[0] Message Index
[#] Next page
[*] Previous page