Does any one know how to get one cell phone to ring on 3 OBi1032s?
Boykin:
I have a question I want to get your thoughts on. I am currently using OBIPlus, but the BT does not work correctly with OBIPlus. Every time I get a call on my cell and answer on a 1032, I get a sound like the other paryt is pressing buttons on their phone whenever they talk. Do you think if I ditched OBiPlus and used this setup with the 202 as the main device I would still have the problem or do you think the problem is with OBIPlus?
I have replaced my 202, the OBiBT dongle, and my cell phone and it still did not fix the problem. When I plug the BT dongle into the 1032 and use the above procedure to answer the calls on other 1032s, I do not have a problem.
azrobert:
This is only a guess, but it does sound like an OBiPlus problem.
Quote
I have replaced my 202, the OBiBT dongle, and my cell phone
Do you still have the old OBi202? You can remove OBiPlus try testing with it.
Boykin:
Is there a limit as to how many phones you can ring at the same time. I have the BT dongle on the old 202 and I can only get 2 out of the 3 1032s to ring when a call comes in on my cell. I can call out on each phone, but I cannot get them all to ring. Here is the inbound digit map for BT.
{ph,sp4(6@192.168.0.61:5063;ui=$1),sp4(6@192.168.0.62:5063;ui=$1),sp4(6@192.168.0.63:5063;ui=$1)}
I shortened the password to only one character to see if there was a length issue but that did not help. I can change the order in which the IP addresses appear in the digit map and the first 2 ring, but the 3rd does not.
azrobert:
I thought the limit was 4 devices including the phone port, so it should work.
Try this:
Voice Services -> SP4 Service -> MaxSessions: 5
If that doesn't work, here is another thing you can do:
Use: {ph,sp4(6@192.168.0.61:5063;ui=$1),sp4(6@192.168.0.62:5063;ui=$1)}
Then in OBi 192.168.0.62 set SP4 inbound route to:
{ph,sp4(6@192.168.0.63:5063;ui=$1)}
I assume by your post, you're not having the audio problems without OBiPlus.
Boykin:
Thanks. The max sessions default was 2. I changed it to 5 and now everything works.
I have not tested the audio quality yet. I did not get to work on this last night and it is 10:53 pm here now. I will test out the audio quality tomorrow night or over the weekend.
I appreciate your help.
Navigation
[0] Message Index
[#] Next page
[*] Previous page