Does any one know how to get one cell phone to ring on 3 OBi1032s?
Boykin:
Quote from: azrobert on August 28, 2014, 08:45:31 am
I forgot about the other devices.
Port 5060 points to SP1.
If SP1 on the other device is defined as SIP then you don't have to do anything.
If it's not defined, this is how to define a dummy trunk:
Service Providers -> ITSP Profile A -> SIP -> ProxyServer: 127.0.0.1
Voice Services -> SP1 Service -> AuthUserName: (any userid)
Voice Services -> SP1 Service -> X_RegisterEnable: (unchecked)
If SP1 is defined as GoogleVoice then use port 5061 for SP2.
Define SP2 like this:
Service Providers -> ITSP Profile B -> SIP -> ProxyServer: 127.0.0.1
Voice Services -> SP2 Service -> AuthUserName: (any userid)
Voice Services -> SP2 Service -> X_RegisterEnable: (unchecked)
And this:
Voice Services -> SP2 Service -> X_ServProvProfile: B
Thanks. I have made the changes and will test this out when I get home.
SteveInWA:
Quote from: CLTGreg on August 28, 2014, 09:26:12 am
Can something like this be done to mix the 1032 with a 202? I assume so but I don't have a 1032 yet but I'd like one.
What I'd like to do is have the 1032 handle multiple lines and trunk out the ones I want to ring in the house. The 202 would handle ringing the house wiring so it appears on all my phones. I guess this could be done with all the lines but I don't want to be woke up by some of them ;D
The more technically-elegant way to do this would be to run some sort of PBX software/hardware, and set up the 1032s as extensions off of the PBX.
I'm not a PBX guru, but if you go with that solution, I am sure one of the guys will esplain it to ya.
azrobert:
I totally screwed up.
Define a dummy SIP trunk on SP1:
Service Providers -> ITSP Profile A -> SIP -> ProxyServer: 127.0.0.1
Voice Services -> SP1 Service -> AuthUserName: (any userid)
Voice Services -> SP1 Service -> X_RegisterEnable: (unchecked)
OBiBlueTooth -> InboundCallRoute:
{ph,sp1(anything@192.168.1.101:5060),sp1(anything@192.168.1.102:5060)}
Boykin:
I cannot get it to work. Here is Sip Profile 3.
Boykin:
Sip 3 Service
Navigation
[0] Message Index
[#] Next page
[*] Previous page