OBi1032 Sound is excellent.
azrobert:
Boykin,
What functions do you want with your OBi1032s?
You can do almost anything you want using a direct LAN connection like I helped you forward inbound calls.
Edit:
Expanding on the above, you can setup one 1032 as a master. Then you can route outbound calls from the other 1032s out any trunk on the master. Any 1032 can call the others, like extensions. You can even set them up as peers and any 1032 can route calls out any trunk on any other 1032.
The only thing you can't do is directly execute a Speed Dial on the master, but you can setup the equivalent of a Speed Dial.
Boykin:
I would like to be able to see on each phone if a line is active and I would like to have 3 digit dialing between phones. I would also like to be able to put a call on hold in one room and pick it up in another.
I have not had a chance to try all of these to see if they work or not. I know if I am on a call, the line buttons on the other phones do not light up to show a line is in use.
azrobert:
Did you see the update to my last post?
Quote
I would like to be able to see on each phone if a line is active
I don't know how to do this.
Quote
I would like to have 3 digit dialing between phones.
This is an easy setup.
Quote
I would also like to be able to put a call on hold in one room and pick it up in another.
I don't own an OBi1032, so I don't know the functions.
An OBi ATA has a call transfer function.
Hit flash then dial a number to transfer the call.
Hit flash again for a 3-way or hang up.
You could transfer the call to another phone using the 3 digit extension number setup from your second question.
I know this is not the same as what you want.
azrobert:
Setup 3 digit extension numbers for your 1032s.
IP Phone -> Phone Settings -> DigitMap
Add following AFTER the beginning parenthesis:
10[123]|
IP Phone -> Phone Settings -> OutboundCallRoute
Add to the beginning:
{(Mexten):sp3},
User Settings -> User Defined Digit Maps -> Map 2
Label: exten
DigitMap: (101<@192.168.0.101:5062>|102<@192.168.0.102:5062>|103<@192.168.0.103:5062>)
Dial 101, 102 or 103.
You only need the addresses of the other 2 1032s.
Boykin:
Thanks. I will have to try this when I get home.
Navigation
[0] Message Index
[#] Next page
[*] Previous page