**8 Doesn't Work After Firmware Upgrade

<< < (2/3) > >>

robhouston:
Okay, RonR, here goes:

PHONE Port DigitMap:  ([1-9]x?*(Mpli)|[1-9]|[1-9][0-9]|911|**0|***|#|**1(Msp1)|**2(Msp2)|**8(Mli)|**9(Mpp)|(Mpli))

PHONE Port Outbound Call Route:  {([1-9]x?*(Mpli)):pp},{(<#:>|911):li},{**0:aa},{***:aa2},{(<**1:>(Msp1)):sp1},{(<**2:>(Msp2)):sp2},{(<**8:>(Mli)):li},{(<**9:>(Mpp)):pp},{(Mpli):pli}

LINE Port Digit Map:  (xxxxxxxS2|1xxxxxxxxxx|xx.)

Thanks for the advice!

RonR:
Those appear to be the defaults with the exception of the S2 on the LINE Port DigitMap.

I would try rebooting the OBi and see if that makes a difference.

RonR:
Does # by itself still get you a PSTN dialtone?

robhouston:
RonR:

Yes, # gets the line port, and I've rebooted the Obi several times.  It's really pretty strange. 

If you have other ideas, they are certainly welcome.  If I continue to have problems, I'll default the Obi to factory settings and re-apply my various changes.

Thanks for your help!

RonR:
What is showing in Call History when you dial **8 + 1234567#?

Navigation

[0] Message Index

[#] Next page

[*] Previous page