Help me please. I completely messed things up on my Obi200

(1/1)

neftv:
I wanted to change my provider and I totally messed up to a point where no calls were coming in or going out so I decided to do a factory reset and start from scratch. 
Can someone please tell me how to setup the following PLEASE?

I am in USA.
On SP1  I want my VOIP A provider for domestic calling and 911

On SP2 I want my VOIP C provider for Calls going to Australia only (01161)

I am hoping this one can work on a Voice Gateway 5 I want my VOIP B provider for calls going to Greece only (01130)


Can someone please help me recreate the what I need.
 Many Thanks in advance

azrobert:
I assume you have defined all your service providers and the Phone Port Primary Line is SP1.

Services Providers -> ITSP A -> General -> DigitMap:
(1xxxxxxxxxx|<1>[2-9]xxxxxxxxx|<1aaa>xxxxxxx|911)

aaa is your local area code for 7 digit dialing.

Services Providers -> ITSP B -> General -> DigitMap:
(01161xx.)

Voice Services -> Gateways and trunk Groups -> Voice Gateway 5
DigitMap: (01130xx.)

Physical Interfaces -> Phone Port
Add to DigitMap AFTER the beginning parenthesis
(Msp2)|(Mvg5)|

It should look like this:
((Msp2)|(Mvg5)|........your current rules.......)

Physical Interfaces -> Phone Port
Add to the beginning of the OutboundCallRoute:
{(Msp2):sp2},{(Mvg5):vg5},

If all the numbers you call in Australia are 11 digits including the country code use the following ITSP B DigitMap instead of the one above:
(01161xxxxxxxxx)

This way when you dial the last digit the call will be routed immediately. With the previous DigitMap there will be a 3 second delay.
You can do the same thing with the VG5 DigitMap for Greece.

neftv:
Ok looked at what you had above and actually did some changes.
It seem though why when I dial *123   it dials User Setting Speed dial 3 that I have setup.  I actually using the first 10. 

Here what I got.  ANd as it turns out it seems I cant use the Voip service to Greece as a gateway so I put it in ITSP profile C.

ItSPprofile A
Digi map  (*9x|1xxxxxxxxxx|<1>[2-9]xxxxxxxxx|<**3>01161xx.|<**3>01130xx.|xx.|(Mipd)|[^*]@@.)

ITSP profile B
Digi  Map   Default

ITSP Profile C
Digi Map  Default

Phone Port
Digi map ([1-9]x?*(Mpli)|[1-9]|[1-9][0-9]|911|**0|***|#|**1(Msp1)|**2(Msp2)|**3(Msp3)|**4(Msp4)|**6(Mvg6)|**7(Mvg7)|**8(Mli)|**9(Mpp)|(Mpli))

Outbound Route {911:sp1},{([1-9]x?*(Mpli)):pp},{(<#:>):li},{**0:aa},{***:aa2},{(<**1:>(Msp1)):sp1}, {(<**2:>(Msp2)):sp2},{(<**3:>(Msp3)):sp3},{(<**4:>(Msp4)):sp4},{(<**6:>(Mvg6)):vg6},{(<**7:>(Mvg7)):vg7},{(<**8:>(Mli)):li},{(<**9:>(Mpp)):pp},{(Mpli):pli}


Please let me know of any changes to make this more efficent.

Navigation

[0] Message Index