OBi Phone Setup Tutorial
SteveInWA:
That sounds like an issue caused by your web browser. Try a different web browser, and at least temporarily, turn off any add blockers or security software.
SteveInWA:
Quote from: Moonis on March 22, 2017, 04:16:54 pm
Hi, I just bought an Obihai200 and I have been having problems installing it. I did everything that the setup process shows and have a solid green light on power and internet with small flickers here and there. When I pick up my phone I don't hear a dial tone and can't call the test number.
Already answered in your other discussion thread.
trabtw:
OK I've done a factory reset. obihai 200 has blinking power led -network led pulsates green signal. Dialing **5 9873 gives network status 52 not available. FING shows unknown device IP 192.168.0.13 That is obihai 200. How do I get obi talk to recognize my obihai 200?
drgeoff:
Quote from: trabtw on November 21, 2017, 11:04:08 am
OK I've done a factory reset. obihai 200 has blinking power led -network led pulsates green signal. Dialing **5 9873 gives network status 52 not available. FING shows unknown device IP 192.168.0.13 That is obihai 200. How do I get obi talk to recognize my obihai 200?
Step #1 is to stop the Power LED blinking - it should be solid green within a few seconds of powering up. http://www.obihai.com/support/troubleshooting/start
(Step #0 is to realise that you've hijacked an inappropriate thread. This one is about OBi IP phones - OBi10x2 models - not ATAs like you OBi200.)
kristenf:
Hi!
I'm wondering if I have one SP (anveo) connected to 7 of the 8 ports on my obi, and a different phone plugged into each port, will they all ring simultaneously when someone calls?
Navigation
[0] Message Index
[#] Next page
[*] Previous page