Faxing Fails with latest firmware
AllenW:
Thanks, but I have no control over the receiver's fax settings.
Also I never had any failures to speak of before the firmware update, now it fails every time.
dircom:
are you using a fax machine? if so try changing the baud rate on your fax machine to 9,600 or 14,400
AllenW:
Using a fax modem. Not sure where to set the baud rate on it.
Multi-Tech Systems MT9234ZPX-PCIE-NV
AllenW:
I figured out how to change it to 9600. faxing works now!
Thanks for your help
AllenW:
SCRATCH THAT. It is **NOT** working. I worked for 2 faxes and now it's back to the same "unexpected error" after multiple attempts.
Problem still exists and it's apparently due to the latest obi202 firmware.
Navigation
[0] Message Index
[#] Next page
[*] Previous page