Actionvoip and AA
RonR:
atikansari,
Assuming you have Google Voice on SP1 and wish to put Actionvoip on SP2...
Starting with all ITSP Profile B/SP2 settings at Default, a minimal configuration would be:
Service Providers -> ITSP Profile B -> SIP -> ProxyServer : sip.actionvoip.com
Voice Services -> SP2 Service -> X_ServProvProfile : B
Voice Services -> SP2 Service -> AuthUserName : (Actionvoip Username)
Voice Services -> SP2 Service -> AuthPassword : (Actionvoip Password)
Actionvoip requires that all calls be made with 00 + countrycode + number. To automate this in this OBi and use conventional calling methods (7/10/11 digit dialing and 011+countrycode + number):
Service Providers -> ITSP Profile B -> General -> DigitMap:
(<00>1xxxxxxxxxx|<001>[2-9]xxxxxxxxx|<001aaa>xxxxxxx|<011:00>xx.|(Mipd)|[^*]@@.'@'@@.)
where aaa is your local area code.
atikansari:
i fallow-up the steps but still the same error "Register Failed: No Response From Server (server=77.72.174.128:5060; retrying)".
Note: i found the problem, i am using Speedtouch 585 V8 Modem and i disable the SIP ALG using ":connection unbind application=SIP port=5060". now is registered. Thanks.
RonR:
At a Windows CMD Prompt, can you ping 77.72.174.128?:
C:\>ping 77.72.174.128
Pinging 77.72.174.128 with 32 bytes of data:
Reply from 77.72.174.128: bytes=32 time=170ms TTL=237
Reply from 77.72.174.128: bytes=32 time=171ms TTL=237
Reply from 77.72.174.128: bytes=32 time=169ms TTL=237
Reply from 77.72.174.128: bytes=32 time=170ms TTL=237
Ping statistics for 77.72.174.128:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 169ms, Maximum = 171ms, Average = 170ms
RonR:
Quote from: atikansari on July 09, 2011, 09:53:10 pm
Note: i found the problem, i am using Speedtouch 585 V8 Modem and i disable the SIP ALG using ":connection unbind application=SIP port=5060". now is registered. Thanks.
Great!
Navigation
[0] Message Index
[*] Previous page