Google Voice Setup on OBi100 SP1 "Connected" but not working
Steve_94303:
Thanks!
Taoman:
Quote from: SteveInWA on September 12, 2014, 10:06:29 pm
Correct. At this time, it's still needed, because OBi devices are still performing call signaling via XMPP Chat protocol.
Hey Steve. Any idea why MWI and stutter tone no longer work with GV on the new firmware? I don't understand how changing the authentication method would affect this. Any insight on this?
SteveInWA:
Good question, Taoman. I have no idea how they got it to work at all in the past, and I recall that it kept breaking, so I don't know how the new GV support would change it. It may have to do with the limitation on the type of data that can be accessed under the new authentication permissions, vs the old, which had unfettered (dangerous) access to everything.
MarkObihai:
Quote from: Taoman on September 12, 2014, 10:12:49 pm
Any idea why MWI and stutter tone no longer work with GV on the new firmware?
Hi Taoman, can you check that the MWI options are enabled for the SPx service you have GV setup on? Go to Expert Config, Voice Service -> SPx Service and check these options are enabled:
MWIEnable
X_VMWIEnable
MessageWaiting
- Mark.
Taoman:
Quote from: MarkObihai on September 13, 2014, 02:04:12 am
Quote from: Taoman on September 12, 2014, 10:12:49 pm
Any idea why MWI and stutter tone no longer work with GV on the new firmware?
Hi Taoman, can you check that the MWI options are enabled for the SPx service you have GV setup on? Go to Expert Config, Voice Service -> SPx Service and check these options are enabled:
MWIEnable
X_VMWIEnable
MessageWaiting
- Mark.
I have checked this already.
I have checked MWIEnable and X_VMWIEnable but there no longer is any setting for "MessageWaiting." Checking the boxes for MWIEnable and X_VMWIEnable makes no difference.
Edit: Actually it turns out when I enable MWIEnable and X_VMWIEnable I can no longer call out using Google Voice. When I try and make a call all I get is dead air. When I uncheck those two boxes Google Voice works normally again.
Navigation
[0] Message Index
[#] Next page
[*] Previous page