OBI100 Stopped Working after Firmware Upgrade

<< < (4/4)

HCream:
Same situation. After updating the firmware to build 2886, my OBi100 is working again. However, the echo test call to **9 222 222 222 is no longer working.

drgeoff:
Quote from: HCream on June 26, 2016, 10:58:27 am

Same situation. After updating the firmware to build 2886, my OBi100 is working again. However, the echo test call to **9 222 222 222 is no longer working.

I've just tried calling the echo test number and it failed.  I suspect that is nothing to do with the firmware but just another of the not infrequent weekend wobblies of the Obitalk network. If so it will probably be up and working again tomorrow.

SteveInWA:
Quote from: drgeoff on June 26, 2016, 11:22:16 am

Quote from: HCream on June 26, 2016, 10:58:27 am

Same situation. After updating the firmware to build 2886, my OBi100 is working again. However, the echo test call to **9 222 222 222 is no longer working.

I've just tried calling the echo test number and it failed.  I suspect that is nothing to do with the firmware but just another of the not infrequent weekend wobblies of the Obitalk network. If so it will probably be up and working again tomorrow.


Quote

my OBi100 is working again


You successfully fixed the problem.  Like drgeoff said, the echo test number is temporarily down (HTTP error 404, not found), but the OBiTALK network is still up.  I tested calling one of my OBis from another one, via **9 <obi number> and it works fine.

Navigation

[0] Message Index

[*] Previous page