Linksys Tones to OBi format?

[Cruize]

I need the following settings from my PAP2T (In Denmark) translated into settings for the OBi. Can anybody help?

Dial Tone: 425@-19;15(*/0/1)
Busy Tone:425@-19;15(.25/.25/1)
Off Hook Warning Tone (What is this on the OBi?:425@-3,5;*(.25/.25/1)
Ring Back Tone:425@-19;*(1/4/1)
SIT1 Tone: 950@-16,1400@-16,1800@-16;20(.33/0/1,.33/0/2,.33/0/3,0/4/0)
SIT2 Tone: 425@-16;15(.25/.25/1)
SIT3 Tone: 425@-16;15(.125/.125/1)

[LeftRight]

Here is my OBi version of listed tones, give it a try --

Dial Tone:                                        425-19;15
Busy Tone:                                      425-19;15;(.25+.25)
Off Hook Warning Tone:
  -- "Howling" tone in OBi tone profile:  425-3;5;(.25+.25)
Ring Back Tone:                                425-19;-1;(1+4)
SIT1 Tone:                                      950-16,1400-16,1800-16;20;(1/.33+0,2/.33+0,4/.33+0,0/0+4)
SIT2 Tone:                                      425-16;15(.25+.25)
SIT3 Tone:                                      425-16;15(.125+.125)

by the way, do you have connection to PSTN line in Denmark? do you have LINE port settings to share?

[Cruize]

Thanks !!

No, I only have OBI100 so no PSTN

[Cruize]

Everything except the SIT tones worked perfectly.

Everytime I tried to ad them my OBi100 would crash and I would have to log into it locally, revert the tones to default, then reset the device and read every setting.
Strangely enough I couldn't just reset the device. I had to change the tones first. If not it would remember them even when trying to reset 

What are the SIT tones used for anyway?