Help with sipgate
WelshPaul:
Make sure you have:
Service Provider Proxy Server: sipgate.co.uk
Outbound Proxy Server: sipgate.co.uk
User Name: Your SIP-ID (7 characters)
Password: Your 8 digit SIP password
Register Expires: 600
I see you have turned off SIP ALG on your Speedtouch router already.
If you are still having issues try these RTP settings:
Local Port Min: 5104
Local Port Max: 5120
Keep Alive Interval:20
And under SP Service:
X_UserAgentPort: 5160
For the record: https://www.ukvoipforums.com/viewtopic.php?f=9&p=952#p952
Looks like the end of the road for the sipgate residential service!
drgeoff:
Quote from: WelshPaul on December 05, 2014, 07:42:30 am
Looks like the end of the road for the sipgate residential service!
I have 3 residential accounts with Sipgate UK, including one with a few pounds of credit. I have had nothing from them about end of service.
Lavarock7:
Sipgate in the US shut down. I can't speak for their UK service.
pepsi_max2k:
Not taking on new users doesn't always mean end of service. Hopefully, anyway. ;)
Also, FFS. It's always the simple stuff. Finally works after 5 hours of messing about. Just had to disable stun :)
Here we go, basic HOWTO - Thompson Router (585v8, ymmv) and Obi100 (ditto):
THOMPSON
1. Hard reset to default settings - button on the rear. If you've not messed anything up in telnet or haven't got tons of custom port forwards enabled, fine, but you've been warned :P
2. Thompson can stay at default settings (well, change the admin pass asap, and enter your isp details). By default, UPNP is enabled - it can stay like this. Nothing default actually needs changing other than...
3. The *only* change you need is to disable SIP ALG - telnet to the thompson, "connection unbind application=SIP port=5060", "saveall", "system reboot".
Without step 3, the Obi will never be able to register with Sipgate / SIP, irrespective of other settings. Soon as you hit enter on the first command, it pretty much registers immediately, but save and reboot anyway.
OBI
- Setup is as https://secure.sipgate.co.uk/user/configreader.php?show_conf=Obitalk (basically all the stuff welshpaul put above)
- Do NOT enable the stun server. enabling will allow rings in, but pickup will have the caller keep ringing.
- For added bonus, I entered all the uk ring settings at https://www.ukvoipforums.com/viewtopic.php?f=25&t=175 .
RESULT
Calls in work fine. Calls out work fine, though sipgate test numbers (10000) you have to wait about 10 - 20 seconds before you hear anything. And I have no credit so can't say what real call are like, but I still get the sipgate "you have no credit" man so guess it works fine.
WelshPaul:
Quote from: drgeoff on December 05, 2014, 09:36:18 am
I have 3 residential accounts with Sipgate UK, including one with a few pounds of credit. I have had nothing from them about end of service.
I don't recall Sipgate giving much notice when they shutdown the US service, no more UK registrations for the residential package and no notification or information posted informing anyone of this?
This sucks, existing customers can still make use of their accounts but I can't help but wonder for how long!
Navigation
[0] Message Index
[#] Next page
[*] Previous page