Help with sipgate
fullblast1A:
Thanks for this help... I am getting somewhere now. I have got the web configuration working but only in internet explorer not my usual Opera browser.
It shows as registered now and in the Sipgate web page it shows as on-line. Great.
BUT when I make a call. it rings once and then a female voice says, " we could not complete your call"
Any ideas at cracking this final piece of the jigsaw.
Thanks Ianobi, and WelshPaul I did all of your settings
fullblast1A:
Hi again. AN update!!!
I received an e-mail from Sipgate support and they gave me lots of settings to use and now everything works perfectly.
Thanks for all of your patience.
PS does Google voice work or has that been turned off now.
Steve
WelshPaul:
Looks like sipgate have been making changes to their site and service since I last used them. I'm guessing you needed the outbound proxy set as sipgate.co.uk and not proxy.live.sipgate.co.uk as is stated in my previous post.
(I think someone did mention sipgate.co.uk)
Anyway, glad you got it all up and running. Never used any google voice services myself... Not even available here in the UK although I think they do offer Google Voice for mobiles?
OBihai however do now offer full official support for google voice. :)
drgeoff:
Quote from: fullblast1A on September 23, 2014, 02:43:17 pm
PS does Google voice work or has that been turned off now.
Google Voice works fine in the UK. You need a US phone number as part of the sign-up process. Use your imagination (hint: IPKall ) or Google for how to do it.
pepsi_max2k:
Halp! Just got an Obi100 and having troubles registering Sipgate with it.
I've tried various settings, including ones recommended by Obi, those in this thread, and those on the Sipgate site at https://secure.sipgate.co.uk/user/configreader.php?show_conf=Obitalk .
So far the best I'm getting is "Register Failed: No Response From Server".
Can anyone dump a load of their settings so I can at least make sure the Obi setup isn't the issue? Might be a routing issue with my thompson TG585; if so, any suggestions?
EDIT: getting somewhere.
Firstly, this probably helped: https://www.ukvoipforums.com/viewtopic.php?f=12&t=167
Basically you have to, via telnet on a Thompson box, "connection unbind application=SIP port=5060" then "saveall".
Start --> Run --> type 'cmd' into this box --> Press Enter
At the prompt, type 'telnet' followed by the ip address of the SpeedTouch (default is 192.168.1.254).
Login using Administrator or Super user (varies depending on device, modern ones just same login details as web interface).
Type: connection unbind application=SIP port=5060
Pres enter, And then type: saveall
Press enter, Finally type: exit
Press ente
With current settings, I'm now getting ringing on landline, but on pickup the caller phone keeps ringing and doesn't get through. Sipgate website also showing as still unregistered, although it's showing registered on Obi. Gonna play with settings later and try fix it up.
EDIT 2: left it a while and now showing online on sipgate, registered on obi. still problem picking up though - stops ringing on local phone, keeps ringing on callers phone until going to voicemail.
Navigation
[0] Message Index
[#] Next page
[*] Previous page