GV with OBi110 and SIP Phone
tsquare2000:
Trying to following this thread: http://www.obitalk.com/forum/index.php?topic=1103.0 or this thread
http://www.obitalk.com/forum/index.php?topic=2454.0 in configuring my OBi110 to use GV for inbound and outbound calls.
I would like to install a SIP client on my MacBook and make and receive calls on that while at home. Taking those instructions and assuming the following:
1. GV number if needed 8885551212
2. GV is configured as SP1
3. I won't be using the phone ports
4. creating the userid as test1 and test2
What would be the modified versions of those instructions. Also I heard that OBi may not be able to work with GV anymore, is that the case?
tsquare2000:
Also assume the IP address of the OBI is 192.168.1.100
SteveInWA:
Read through the recent posts on the forum, instead of posts that are two or three years old.
Google Voice is now officially supported (by both Obihai and Google) on OBi devices.
http://www.obitalk.com/forum/index.php?topic=8560.msg56460#msg56460
As for making calls on your Macbook, no need for all that. Just use Google Hangouts, which supports making and receiving telephone calls over an internet connection.
https://support.google.com/hangouts/answer/2944865?hl=en&ref_topic=2944848
tsquare2000:
True maybe, however I feel as though the Hangouts app never either answers, or makes calls well. Where as a softphone/SIP client generally works very well.
That and I have had my OBi110 for quite a few years now, and just looking to pull the plug on the home phones and just use a softphone.
azrobert:
I have the Phonerlite softphone on a Windows machine setup to make outbound calls on my OBi. I think I had inbound calls working too. I'll have to play and see if inbound calls will work.
I'm not familiar with the Macbook. You need a SIP client that can make outbound calls without registration.
It's a very easy setup and requires a SP trunk defined as SIP and one line of code.
Post back if you can find a SIP client.
Navigation
[0] Message Index
[#] Next page