connecting OBi110s to legacy PBX analog Ports Via OBi110s line ports
azrobert:
I can't help you with a softphone recommendation.
OBi110 configuration changes
Setup a dummy SIP trunk like this:
Service Providers -> ITSP Profile A -> SIP -> ProxyServer : 127.0.0.1
Voice Services -> SP1 Service -> AuthUserName : user1 (or anything you want)
Voice Services -> SP1 Service -> X_RegisterEnable : (unchecked)
Voice Services -> SP1 Service -> X_InboundCallRoute : {user1>(xxx):li}
user1 in the inbound route must match UserID in iPhone
Replace Physical Interfaces -> Line Port -> InboundCallRoute with following:
{ph,sp1(user1@192.168.1.101:5060)}
192.168.1.101 is the IP address of the iPhone.
iPhone softphone setup:
Proxy: 192.168.1.110
UserId: user1
Password: anything if required by softphone
Registration: off
192.168.1.110 is the IP address of the OBi110.
You should also assign a static IP for the OBi110.
Other options for the Line Port InboundCallRoute.
This will send the inbound call to 2 iPhones:
{ph,sp1(user1@192.168.1.101:5060), sp1(user2@192.168.1.102:5060)}
This will send the inbound call to 2 iPhones with a delay of 3 seconds for the 2nd.
{ph,sp1(user1@192.168.1.101:5060),sp1(user2@192.168.1.102:5060;d=3)}
You can send the call to 4 devices including the phone port.
You can remove "ph" and send the call to 4 iPhones.
Motohead:
Thanks azrobert!!
Motohead:
I've been looking though features for iPhone soft phone apps and the registration issue isn't mentioned in their descriptions
Does anyone know of an iPhone softphone that will call without registration
rolandh:
I like Acrobits' Groundwire app. It's not cheap by iOS app standards but you get what you pay for. It will make calls without registration. I believe Bria will as well, however, I've not looked at it recently.
Motohead:
thanks ill give the groundwire a try
Navigation
[0] Message Index
[#] Next page
[*] Previous page