OBI 200 with Cisco 7961/62 Dial Out issues -
azrobert:
I made 2 updates to my last post.
denk:
Thanks Azrobert for taking the time.
Just tried your suggestions to the letter, still no joy. Nothing in history or a local client. Incoming calls still comes in perfectly to the 7961.
The reading and research continues.
denk:
I re-config the 7960 and it worked with the OBI200 just fine on first try. Works perfectly.
Now i know I need to dissect the 7961 xml config. Something in there thats preventing it from dialing out. Its not the dialplan.xml coz i used the same plan.
reading continues.
azrobert:
Quote from: denk on October 03, 2014, 08:20:17 am
I re-config the 7960 and it worked with the OBI200 just fine on first try. Works perfectly.
I assume you are registering the 7960 to the OBi200.
Will the 7961 register to the OBi200?
See the last paragraph in my last post.
Be aware that the OBi200 will show the IP address of the last device to register, even if the device is powered off. Check if it's the 7961's IP address.
denk:
This is now fixed.
Apparently, 1st, the 7961 is more sensitive to the xml configuration than the 7960, 2nd issue is the firmware used plays a key role in making the 7961 work.
1st issue. As Azrobert says, the devices needs to be "not registered", but it looks like the outbound proxy/proxy port cannot be empty (supposedly, its ok on Pi and asterisk servers and ok on the 7960). The 7961 does not register but it does shows as a client (as Azrobert pointed out).
<outboundProxy></outboundProxy>
<outboundProxyPort></outboundProxyPort>
<registerWithProxy>false</registerWithProxy>
2nd issue. Use firmware 8.35, i tried firmwares 8.0 to 9.4 and can only get 8.35 to work. Other versions may work but I just don't know how to make it work.
Lots of frustrating days but learned a lot. Thanks Azrobert for the lesson in dialing out and registration and taking the time to answer questions.
Navigation
[0] Message Index
[#] Next page
[*] Previous page