OBI 200 with Cisco 7961/62 Dial Out issues -
azrobert:
The call will not show in the Call History if it is not routed somewhere.
If for some reason it is not matching the InboundCallRoute rules it won't show in the Call History.
That is why I asked you to change the inbound route to "ph".
If the call is getting to the OBi200, now it will show in the Call History.
The Call History will also show if it is sending 9255551212 as the UserID
denk:
when i changed the sp2 inbound to ph, the analog and the cisco 7961 rings ok. I could still answer both.
on history i get
fork to: ph1 SP2 (9255551212)
ringing (ph1)
ringing (sp2(9255551212)
azrobert:
It looks like you tested an inbound call that was forked to the phone port and the 7961.
I'm sorry if I wasn't clear on what I wanted you to do.
I want you to place an outbound call with the 7961.
I don't expect the outbound call will work.
If the outbound call reaches the OBi200 it will ring the phone port.
Maybe then the call history will show why it wasn't working before.
denk:
azrobert...actually the fault was mine. my apologies
I should have said I tested calling FROM both the 7961 and the analog and only the analog call went through. Calling out from the 7961 never registers even after changing the inbound route to ph.
the graphic that i showed is actually calling to the analog and 7961 to see if it still works. Thats the last and only entry on the call history.
Thanks again for taking the time.
azrobert:
You can register the 7961 to the OBi200.
Service Providers -> ITSP Profile C -> SIP
ProxyServer: 127.0.0.1
Voice Services -> SP3 Service
X_ServProvProfile: C
X_RegisterEnable: Unchecked
X_InboundCallRoute: ph (for testing)
X_Proxy: Checked
AuthUserName: 9255551212
AuthPassword: anything (must match 7961's PW)
7961 setup
Proxy: xx.xx.xx.xx (IP address of the OBi200)
Proxy Port: 5062
Userid: 9255551212
Password: anything
Registration: Enabled
Log into the OBi200
The Status screen will be displayed.
Check SP3 Service Status
It will look like this if the phone registers:
Registration Not Required;local_client=192.168.1.100:5060
Now try an outbound call.
Navigation
[0] Message Index
[#] Next page
[*] Previous page