Power Consumption

(1/3) > >>

idahowayne:
Am trying to decide between the OBi 100 and the OBi 200. We live off grid (solar power only) so I will be running the OBi straight from 12 volts without the power adapter.

I have been told that the OBi100 draws 95 milliamps at idle and 150 milliamps while talking. I would like to know what the 200 draws for comparison. If it is the same or close I would prefer the 200.
Thanks in advance for any info you can provide.

sailing:
I cannot help you with the current draw from these devices but I have some recommendations for you. The 12V must be regulated. The Obi expects 12V not 14-15V lead acid batteries could supply. Also, you need a fuse in series with the 12V to the Obi for your setup. There must be a way to limit the current should some kind of short occur in the Obi.

OBiSupport:
OBi200 needs 110-120 milliamps while idle and 160 milliamps while talking.

idahowayne:
Thank you support. How about the 202, does it draw any more current than the 200?

Jackson:
Quote from: sailing on October 08, 2014, 04:25:48 am


The 12V must be regulated. The Obi expects 12V not 14-15V lead acid batteries could supply. Also, you need a fuse in series with the 12V to the Obi for your setup. There must be a way to limit the current should some kind of short occur in the Obi.


Would this simple approach work?  12V zeners are quite inexpensive.

http://www.learningaboutelectronics.com/Articles/Overvoltage-protection-circuit.php

Navigation

[0] Message Index

[#] Next page