Extend a single POTS over a network to multiple OBi100 devices?

<< < (2/2)

Airin:
Thanks, we will try that when we get the devices and let you know!

azrobert:
The first thing you need to do is add your devices to OBiTalk.
Log into your OBiTalk account
Click "Add Device"
Follow instructions.
You just have to dial **5nnnn from the device with the number supplied.
If you don't have a GoogleVoice account uncheck "Do you want to use GV?".
You can always add GV latter.
Repeat for each device.

Now you are setup to configure the devices from OBiTalk.
I configure my devices locally, but most people use OBiTalk.
If you decide to use the local interface you have to turn off Auto Provisioning.
It also makes it more difficult to setup GV.

My next post will be how to use OBiTalk.

azrobert:
From the OBiTalk dashboard click Edit Profile on the left column.
At the bottom of the page check "Enable Obi Expert..."
Click Submit Query.
Now you can go directly to OBi Expert from the dashboard.

Click Obi Dashboard.
On the right of your OBi110 is an icon with a red E.
Click on it to enter OBi Expert.

To navigate click on the titles with the +
Then click on a sub-title
An example click on Service Providers
Then click ITSP Profile A General
There 2 boxes to the right of each setting
To change a setting uncheck the box under ObiTalk Setting
Then uncheck the box under Device Default
Now change the setting
After you have made all the necessary changes for that page, click Submit at the bottom of the page.
OBiTalk will download the configuration changes to the OBi110 and reboot it.
Wait until this process is complete before continuing to the next page.

Navigation

[0] Message Index

[*] Previous page