Below is a sample configuration.
I used cut and paste to create most of this sample.
I hope I didn't make too many mistakes.
7 and 10 digit numbers will be routed out PSTN
11 digit and international calls will be routed out SP1
If needed you have to define a VOIP provider on SP1 for each OBi
It's not required to setup SP1. You will just get an error if a call is routed to SP1.
I setup a free tollfree provider on SP2.
Since 4 people are sharing the PSTN line, my thinking was not to tie up PSTN with tollfree numbers.
Tollfree numbers will be routed out SP2.
If you want to route a tollfree number to PSTN, dial it with 10 digits.
You would call the other OBi's using speed dials.
Let me know if the above doesn't meet your requirements.
After you get the OBi110 and one OBi100 working, you will be able to copy the OBi100 configuration to the other OBi100s.
200111111 = OBi number of OBI110
200222222 = OBi number of OBI100#1
200333333 = OBi number of OBI100#2
200444444 = OBi number of OBI100#3
222222222 is for the Echo Test
OBi110
Service Providers -> ITSP Profile A General -> DigitMap:
(1xxxxxxxxxx|011xx.)
Service Providers -> ITSP Profile B General -> DigitMap:
(18(00|88|77|66|55|44)xxxxxxx)
Service Providers -> ITSP Profile B SIP -> ProxyServer:
tf.callwitus.comVoice Services -> SP2 service -> X_ServProvProfile: B
Voice Services -> SP2 Service -> X_RegisterEnable: Unchecked
Voice Services -> SP2 Service -> AuthUserName: 8005551212
This will be used as the outbound callerid for tollfree numbers
Voice Services -> OBiTalk Service -> InboundCallRoute:
{200222222|200333333|200444444>(Mli):li},{ph}
Physical Interfaces -> Phone Port -> DigitMap
Add AFTER the beginning parenthesis: xxxxxxx|[2-9]xxxxxxxxx|
It will look like this:
(xxxxxxx|[2-9]xxxxxxxxx|.....the current settings....)
Physical Interfaces -> Phone Port -> OutboundCallRoute
Add to the beginning: {(Mli):li},{(Msp2):sp2},
Physical Interfaces -> Phone Port -> Primary Line: SP1 Service
Physical Interfaces -> Line Port -> DigitMap
(xxxxxxx|[2-9]xxxxxxxxx|<1>8(00|88|77|66|55|44)xxxxxxx)
Physical Interfaces -> Line Port -> X_InboundCallRoute:
{ph,pp(200222222),pp(200333333),pp(200444444)}
All OBi100's
Service Providers -> ITSP Profile A General -> DigitMap:
(1xxxxxxxxxx|011xx.)
Service Providers -> ITSP Profile B General -> DigitMap:
(18(00|88|77|66|55|44)xxxxxxx)
Service Providers -> ITSP Profile B SIP -> ProxyServer:
tf.callwitus.comVoice Services -> SP2 service -> X_ServProvProfile: B
Voice Services -> SP2 Service -> X_RegisterEnable: Unchecked
Voice Services -> SP2 Service -> AuthUserName: 8005551212
Voice Services -> OBiTalk Service -> DigitMap: (xxxxxxx|[2-9]xxxxxxxxx)
Voice Services -> OBiTalk Service -> InboundCallRoute: ph (This is the default)
Physical Interfaces -> Phone Port -> DigitMap
Add AFTER the beginning parenthesis: (Mpp)|
It will look like this:
((Mpp)|222222222|.....the current settings....)
Physical Interfaces -> Phone Port
Add the following to the beginning of the OutboundCallRoute:
{(<200111111*>(Mpp)|222222222):pp},{(Msp2):sp2},
All OBi's
Setup 4 Speed Dials:
User Settings -> Speed Dials
pp(200111111)
pp(200222222)
pp(200333333)
pp(200444444)