Newbie from Ireland looking for advise on forwarding

<< < (2/2)

mylesm:
Thanks for that

But my Star codes are funny if I *72 it does not enable CF but if I *72# it works

and if I *73 it does not disable but if I *73# it disables but also the phone speaker says no call route available to complete your call but it does disable CF so the star codes are working that way but with weird messages which if someone else heard trying to set the forward would presume it had not worked

I can see it on the obi web interface changing tickbox but my wife would not see this she would just want to enter *code and it works

Also tried

Instead of forwarding, you can have both phones ring simultaneously.
Now you don't have to turn forwarding on/off.

Voice Services -> SP1 Service -> X_InboundCallRoute:
ph, sp1(your_acct@sip2sip.info;ui=$1)

I set up a free ac with sip2sip and I can call it from xlite softphone on my pc using myacct@sip2sip.info and it works fine my cell phone Softphone rings and shows cid from sip2sip but on obi if I

CallForwardUnconditionalNumber    sp1(myacct@sip2sip.info)

enable call forward checkbox

ring home from cellphone nothing happens cellphone just disconnects

uncheck call forward box and home phone rings normally

as i say my sip2sip seems to be ok it rings when i call it from another softphone

Thanks again for your help

mylesm

azrobert:
Did you try this?
Voice Services -> SP1 Service -> X_InboundCallRoute:
ph,sp1(your_acct@sip2sip.info;ui=$1)

I have a typo in my original post.
There is a space after "ph,".
The above is the correct syntax.

I don't know why you are getting the strange results using the star codes.
The forwarding to Sip2Sip looks good.
I have a Sip2Sip account, but I'm not setup to test with it and don't feel like screwing with it.

I forwarded a call to a softphone on a PC like this:
sp1(anything@192.168.1.100:5060)

192.168.1.100 is the IP address of my computer.

Navigation

[0] Message Index

[*] Previous page