Call wrong numbers

(1/2) > >>

echen:
I got a replaced Obi 110 working with GV fine.

The problem is the land line, everytime I call out to local land line by the attached phone or by obitalk thru the Obi110, i always going to the wrong no. even I call to my cellphone by the attached land line.

checked the land line and function ok with the phone directly connect to the line.

any suggetion?  DTMF problem?

Thanks in advance.

giqcass:
Log in to your Obi directly and check the call history to see what is happening.  If it's DTMF you will likely see it in the logs.


Press ***1 from a phone attached to the obi to find the IP address. 
Type your OBI IP address in to a browser.
User and password are both admin unless you changed them.
Then navigate the menu as follows.
Status
>>>>>>>Call history

azrobert:
You can try
Physical Interfaces -> Phone Port -> DTMFRxMode: Software

echen:
Quote from: giqcass on October 22, 2014, 08:52:02 pm

Log in to your Obi directly and check the call history to see what is happening.  If it's DTMF you will likely see it in the logs.


Press ***1 from a phone attached to the obi to find the IP address. 
Type your OBI IP address in to a browser.
User and password are both admin unless you changed them.
Then navigate the menu as follows.
Status
>>>>>>>Call history

Thanks for your help, the device right now not in my hand, will try to ask people to check the log. the Obi expert show call status during I was making the call via obitalk seems ok -

echen:
Quote from: azrobert on October 22, 2014, 08:53:01 pm

You can try
Physical Interfaces -> Phone Port -> DTMFRxMode: Software


thanks
it should be the Line port problem as both obitalk and phone call using the land line have problem, tried your advise and still problem.

Navigation

[0] Message Index

[#] Next page