Calling obi to obi or transferring call from 1 obi to another.
Dranon2:
Yes I see the speed dials already setup! Thank-you BUT I still get the rejection notice
Under obitalk service there is only InboundCallRoute NOT x_InboundCallRoute that is only under SP1 Service
MAYBE It does not work because I setup an ip phone on one of the obi 200 and the obi uses it as a proxy?? Each obi has its own number and speed dial setup on the obi dashboard, but the speed dials just dial **9 and obi number but I get rejections from the service provider??
azrobert:
I shouldn't do this stuff from my failing memory. LOL
You are correct, it's InboundCallRoute.
The SP trunks have X_InboundCallRoute.
Let's start over.
Again, I don't use OBiTalk.
If I suggest or say something that's not correct, please someone jump in and correct me.
I think you setup a separate OBiTalk userid for each OBi202.
You then added the OBi202 to the other userid's Circle of Trust.
That is why you were directed to the Auto Attendant when you called the other OBi202.
Remove the OBi202 from the COT.
You don't need the COT to call the other OBi202.
I don't know if after you removed the rules from the InboundCallRoute OBiTalk re-added them because of the COT entry.
I forgot the default Speed Dial might be in the format **9xxxxxxxxx
This should work, but I like the format PP(xxxxxxxxx)
The Trunk setup as a Proxy will not affect OBi to OBi calling via OBiTalk network.
Check the following and see if it's still setup correctly.
Voice Services -> OBiTalk Service -> InboundCallRoute: ph
Is it still failing?
What is the error message?
Dranon2:
Sorry I had REAL work to do!
OK so I removed the obi from the dashboard set it up under a different email address and added each obi to the others COT, still getting errors THE COULDNT COMPLETE CALL message. Let me ask this question both the obis are using the same GV numbers could THAT be the problem? ??? BTW THANKS for all the help I have tried getting help in the past with no answers! I have tried to setup Obiplus to do this that way but I could never get it to work. I am very positive about it working this way! Been using the obis for couple of years now and wanting them to use the ip phones and be able to transfer call and intercom would be GREAT HELP
azrobert:
Sorry, you didn't understand me. I thought you had 2 emails and had the OBi202s in COT. I also thought that was causing the problem. When the OBi is in COT you will be sent to the Auto Attendant.
Can you setup both OBi202s under 1 email?
Don't do anything.
I'm going to do this another way.
I'll post back in a few minutes.
Which SPx is setup for the Proxy?
Dranon2:
SP4 I setup just like in the tutorial
http://www.obihai.com/docs/OBi-VoIP-Device-Attach-Legacy-IP-Phone-Workbook-v1-0.pdf
Navigation
[0] Message Index
[#] Next page
[*] Previous page