OBI 100 -> OBI 200, now caller ID displays "Out of Area"
SteveInWA:
You now need to use the OBiTALK portal to properly configure OBi devices to work with GV, using the secure access token method for authenticating to your Google account. You can revert back to the local interface after you do that.
http://www.obitalk.com/forum/index.php?topic=8560.msg56460#msg56460
dhobi:
Quote from: SteveInWA on October 27, 2014, 07:58:02 pm
You now need to use the OBiTALK portal to properly configure OBi devices to work with GV, using the secure access token method for authenticating to your Google account. You can revert back to the local interface after you do that.
http://www.obitalk.com/forum/index.php?topic=8560.msg56460#msg56460
Really? I didn't do anything special, I was able to configure GV just fine via the local interface using my GV account username/password. Everything works, I can make and receive calls via GV just like before using my OBI100. It's just this little quirk, a slightly different behavior in CID than with the OBI100.
dhobi:
What exactly is GT1? I've never seen it in the OBI100 and I've seen some mentions that it is an undocumented trunk name? Is my OBI200 configured correctly as it shows incoming GV calls coming to GT1, I'm pretty sure it used to say SP1 with the OBI100. Thanks.
azrobert:
I'm getting the same results.
My OBi200 is at Build 4420.
My OBi110 is at Build 2824.
I have a Panasonic phone.
Inbound calls from GV on the OBi200 shows "Out of area".
Inbound calls from GV on the OBi110 shows "1-800-555-1212".
I used the same Panasonic phone with both calls.
---------------------------------------------------------------------
GT1 signifies GoogleVoice.
The "T" might mean "Trunk".
The OBi110 shows "GoogleVoice1".
dhobi:
Quote from: azrobert on October 28, 2014, 04:59:36 pm
I'm getting the same results.
My OBi200 is at Build 4420.
My OBi110 is at Build 2824.
I have a Panasonic phone.
Inbound calls from GV on the OBi200 shows "Out of area".
Inbound calls from GV on the OBi110 shows "1-800-555-1212".
I used the same Panasonic phone with both calls.
---------------------------------------------------------------------
GT1 signifies GoogleVoice.
The "T" might mean "Trunk".
The OBi110 shows "GoogleVoice1".
Bummer. I may have to go back to the OBI100, this CID change is annoying, showing everything as "Out of area" is not useful at all.
There's a build 4350 for the OBI200 but it won't fix anything wrt CID.
I hope someone at Obihai is reading this thread.
Navigation
[0] Message Index
[#] Next page
[*] Previous page