forking from Obi110 to Snom320 on LAN

(1/3) > >>

mrjoe:
Gone back to the Obi110 because the Disconnect tone wasn't working on the OBi202-OBiLine setup.

I'd like calls that come in on the line to fork to the AA & one of my Snom320s simultaneously.  In other words the AA counts down and answers after 14700ms if no one picks up on the Snom.

I have a Google Voice account on each of the SPs.  Do I need a SIP account setup in order to achieve this?

I can call from 1 of my Snoms to the other merely by dialing 10.100.102.5.

thanks in advance for the help

azrobert:
You need an SP trunk defined as SIP, but it doesn't have to be defined on the OBi110. You could route the call to your OBi202 via OBiTalk network then bridge the call to the Snom320. I don't know if you want to do this because the call path would be up to the OBiTalk servers, down to the OBi202 and then to the Snom320.

mrjoe:
thank you azrobert.

Is this what I would put in Line Inbound Callroute? {aa,sp2(username of identity@10.100.102.6:5060)}

azrobert:
Quote from: mrjoe on October 28, 2014, 08:16:13 am

Is this what I would put in Line Inbound Callroute? {aa,sp2(username of identity@10.100.102.6:5060)}


Correct.

Plus this for the delay:
Voice Services -> Auto Attendant -> AnswerDelay: 14700

mrjoe:
Thanks azrobert.

Can I fork outgoing calls to?

I'd like people to press 1 after pressing 2 in the AA and have it ring me via GV and a SIP address.

Navigation

[0] Message Index

[#] Next page