Quote from: danzg on November 01, 2014, 05:19:54 PM
Does my OBi have a "SIP address"? Where do I find it?
Your OBi may be reached by more than one SIP address and the best one to use may depend on where the forwarding is being done.
If the OBi is SIP registered with an ITSP then it can be reached with an address of the form
account@itsp.com. This would be appropriate if the forwarding is being done by nettalk, not in equipment at your location.
If you want to forward from equipment at your location to an OBi on the same LAN then the private IP address is suitable. Again it looks like an email adress - something@p.q.r.s where p.q.r.s is the LAN address of the OBi. You can find that eg by dialling ***1. It used to be the case that an OBi would respond when almost any string was used for the 'something' but that leaves the OBi susceptible to SIP scanners. Some of the ways to tighten that mean that a specific string m6st be used for 'something' and/or a port number must be added at the end as in string@p.q.r.s:port.