OBi202 outbound call busy with ip phone

(1/2) > >>

Junaid:
Configured on obi202 Yealink Sip-TP20 ip phone on SP4 following:
http://www.obihai.com/docs/OBi-VoIP-Device-Attach-Legacy-IP-Phone-Workbook-v1-0.pdf

Incoming calls are working. Problem is dialing out results busy tone- there is nothing in obi call logs.
SP4/X_InboundCallRoute={1001>(Msp1):SP1}

I have also tried
SP4/X_InboundCallRoute={ph}
SP4/X_InboundCallRoute=sp1

Anyone has a non-supported IP phone outgoing call working with OBI?
Please help

azrobert:
Try IP phone proxy:
xx.xx.xx.xx:5063

xx.xx.xx.xx = OBi202's IP address

Does the IP phone register?

Junaid:
per instructions, it is using IPPhone IP as proxy and
SP4/X_RegisterEnable=no(or unchecked)
Phone status displays connected/registered and receive incoming calls...

azrobert:
I couldn't get my phone to register using format "555555555.pnn.obihai.com:5063".
I had to use "xx.xx.xx.xx:5063".
I have an OBi200.

If you use SP4/X_InboundCallRoute={ph} does the OBi202's phone port ring?

Junaid:
I had to do the same.

My external incoming calls set as SP1/X_InboundCallRoute={ph,ph2,sp4(1001)}, I'm able to receive on my IP Phone. 

Ph does not ring while dialing Outgoing call..... just gives busy signal dialing any number....

Navigation

[0] Message Index

[#] Next page